Gears and transmission
Exoskeleton Foot Plate
- Bounding box
- 250.0 × 90.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact professional CAD engineering blueprint for a modular AI-powered lower-limb rehabilitation exoskeleton with integrated NMES. Show complete front, side, rear, top, isometric and exploded views with realistic mechanical parts and numbered BOM: pelvic frame, adjustable hip joints/BLDC actuators, thigh rails, powered knee joints, shank rails, ankle actuators, foot plates, bearings, shafts, gears, torque/force sensors, IMU, EMG and plantar-pressure sensors, NMES electrode holders, AI controller, battery pack, wiring harness and protective covers. Include key dimensions in mm, hole patterns, shaft/bearing interfaces, joint travel limits, mounting points, cable channels, fasteners, material and manufacturing method for each part. Show detailed sectional views of hip/knee/ankle joints and electronics enclosure, NMES electrode placement and wiring layout. Use parametric CAD-style geometry, ISO engineering drawing conventions, tolerances, datums, surface-finish symbols, part numbers, revision block, BOM and assembly sequence. Suggested materials: aluminum alloy/CFRP structural parts, stainless/titanium joint components, engineering-polymer covers, TPU padding. Mark dimensions as preliminary prototype values requiring engineering validation; do not claim medical certification.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 250 mm | 150 – 350 |
| Plate Width | 90 mm | 60 – 120 |
| Plate Thickness | 6 mm | 3 – 12 |
| Sensor Pocket Length | 80 mm | 40 – 120 |
| Sensor Pocket Width | 30 mm | 20 – 50 |
| Sensor Pocket Depth | 2.5 mm | 1 – 4 |
| Strap Slot Length | 25 mm | 15 – 40 |
| Strap Slot Width | 5 mm | 3 – 8 |
| Slot Spacing | 120 mm | 80 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled