Brackets and mounts
eVTOL QuadPlane Fuselage
- Bounding box
- 81.6 × 97.6 × 652.6 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric eVTOL QuadPlane fuselage in mm. Overall length: 650 Max width: 72 Max height: 88 Use smooth elliptical cross-sections at: X=0: 28x28 X=80: 58x70 X=140: 68x82 X=220: 72x88 X=350: 58x70 X=500: 32x40 X=650: 18x22 Loft all sections smoothly from nose to tail. Add: - rounded aerodynamic nose - flat cruise-motor mounting face at nose - top electronics hatch 180x58 - battery cavity 115x40x38 - flight-controller cavity 110x70x30 - wing seat for 240 mm root chord - front and rear boom interfaces for 10 mm OD carbon tubes Keep the model symmetric about the aircraft center plane. Output as a clean editable solid suitable for STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Station 1 X | 0 mm | 0 – 200 |
| Station 1 Width | 28 mm | 10 – 100 |
| Station 1 Height | 28 mm | 10 – 100 |
| Station 2 X | 80 mm | 0 – 200 |
| Station 2 Width | 58 mm | 10 – 100 |
| Station 2 Height | 70 mm | 10 – 100 |
| Station 3 X | 140 mm | 0 – 300 |
| Station 3 Width | 68 mm | 10 – 120 |
| Station 3 Height | 82 mm | 10 – 120 |
| Station 4 X | 220 mm | 0 – 400 |
| Station 4 Width | 72 mm | 10 – 120 |
| Station 4 Height | 88 mm | 10 – 120 |
| Station 5 X | 350 mm | 200 – 500 |
| Station 5 Width | 58 mm | 10 – 100 |
| Station 5 Height | 70 mm | 10 – 100 |
| Station 6 X | 500 mm | 400 – 600 |
| Station 6 Width | 32 mm | 10 – 80 |
| Station 6 Height | 40 mm | 10 – 80 |
| Station 7 X | 650 mm | 600 – 800 |
| Station 7 Width | 18 mm | 5 – 50 |
| Station 7 Height | 22 mm | 5 – 50 |
| Nose fillet radius | 5 mm | 0 – 20 |
| Hatch center X | 300 mm | 100 – 550 |
| Hatch length | 180 mm | 50 – 300 |
| Hatch width | 58 mm | 20 – 80 |
| Hatch depth | 30 mm | 5 – 50 |
| Battery cavity X | 250 mm | 100 – 500 |
| Battery cavity Y | 0 mm | -10 – 10 |
| Battery cavity Z | -12 mm | -50 – 50 |
| Battery cavity length | 115 mm | 50 – 200 |
| Battery cavity width | 40 mm | 20 – 80 |
| Battery cavity height | 38 mm | 10 – 80 |
| FC cavity X | 300 mm | 100 – 500 |
| FC cavity Y | 0 mm | -10 – 10 |
| FC cavity Z | 10 mm | -50 – 50 |
| FC cavity length | 110 mm | 50 – 200 |
| FC cavity width | 70 mm | 20 – 100 |
| FC cavity height | 30 mm | 10 – 80 |
| Wing seat center X | 220 mm | 100 – 500 |
| Wing seat center Z | 0 mm | -50 – 50 |
| Wing seat chord | 240 mm | 100 – 400 |
| Wing seat depth | 10 mm | 2 – 30 |
| Wing seat height | 15 mm | 2 – 50 |
| Front boom X | 80 mm | 0 – 300 |
| Front boom Z | 0 mm | -50 – 50 |
| Rear boom X | 450 mm | 200 – 600 |
| Rear boom Z | 0 mm | -50 – 50 |
| Boom tube OD | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent