Everything else
Estrusore Filamento 6mm con Motore NEMA e Assieme
- Bounding box
- 60.0 × 42.0 × 77.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
deve essere presente anche il motore e tutte le componenti necessarie per il funzionamento compresi cuscinetti, viti e ruote, crea l'assieme montato di tutte le parti
Parameters
| Name | Value | Range |
|---|---|---|
| Filament Diameter | 6 mm | 1.75 – 10 |
| Filament Clearance | 0.4 mm | 0.1 – 1.5 |
| Base Length | 60 mm | 30 – 120 |
| Base Width | 40 mm | 20 – 100 |
| Base Thickness | 4 mm | 2 – 10 |
| Body Length | 50 mm | 30 – 100 |
| Body Width | 40 mm | 20 – 100 |
| Body Height | 30 mm | 20 – 60 |
| Gear Cavity Diameter | 18 mm | 8 – 30 |
| Idler Bore Diameter | 10 mm | 5 – 20 |
| Spring Pocket Diameter | 10 mm | 5 – 20 |
| Spring Pocket Depth | 15 mm | 5 – 30 |
| Motor Mount Spacing | 31 mm | 16 – 50 |
| Motor Mount Hole Diameter | 3.4 mm | 2 – 6 |
| Motor Mount Hole Depth | 8 mm | 3 – 15 |
| Plate Mount Hole Diameter | 6 mm | 3 – 12 |
| Plate Mount Hole Spacing | 30 mm | 15 – 60 |
| Motor Body Side | 42 mm | 20 – 60 |
| Motor Body Height | 40 mm | 20 – 80 |
| Motor Shaft Diameter | 5 mm | 2 – 10 |
| Motor Shaft Protrusion | 20 mm | 5 – 40 |
| Drive Gear Diameter | 17 mm | 6 – 30 |
| Drive Gear Thickness | 8 mm | 2 – 15 |
| Idler Wheel Diameter | 9.6 mm | 4 – 20 |
| Idler Wheel Thickness | 6 mm | 2 – 12 |
| Spring Outer Diameter | 9.6 mm | 4 – 20 |
| Spring Wire Diameter | 1 mm | 0.5 – 3 |
| Bearing Outer Diameter | 16 mm | 8 – 30 |
| Bearing Inner Diameter | 5.2 mm | 3 – 12 |
| Bearing Thickness | 5 mm | 2 – 10 |
| Screw Diameter | 3 mm | 1.5 – 6 |
| Screw Head Diameter | 6 mm | 3 – 12 |
| Screw Head Height | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm