Everything else
eSprinter L2H2 Rear Panel
- Bounding box
- 1993 × 1850 × 25 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
I want the exact dimensions like scanned back of a E Sprinter l2h2 first
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 1993 mm | 1500 – 2500 |
| Overall height | 1850 mm | 1200 – 2400 |
| Panel thickness | 6 mm | 3 – 15 |
| Door width | 780 mm | 500 – 1000 |
| Door relief height | 4 mm | 1 – 10 |
| Center gap between doors | 10 mm | 5 – 40 |
| Door bottom margin | 200 mm | 50 – 400 |
| Door top margin | 100 mm | 50 – 400 |
| Window width | 550 mm | 300 – 900 |
| Window height | 450 mm | 200 – 800 |
| Window bottom offset from door bottom | 300 mm | 100 – 600 |
| Handle width | 20 mm | 10 – 40 |
| Handle length | 180 mm | 100 – 300 |
| Handle depth | 15 mm | 8 – 30 |
| Hinge protrusion | 40 mm | 20 – 80 |
| Hinge height | 80 mm | 40 – 150 |
| Hinge depth | 20 mm | 10 – 50 |
| Corner radius | 20 mm | 0 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm