ESP32 Slim Enclosure - Housing + Separate Cover

1 views

Bounding box: 253.2 × 50.0 × 28.6 mm
Engine: Precision B-rep
Parameters: 59
Published: October 8, 2026

Download

Free to download and use. See the terms.

The prompt

but i wanted to part

Parameters

Name	Value	Range
Outer Length (X)	126 mm	80 – 220
Outer Width (Y)	50 mm	30 – 120
Housing Height (Z)	24 mm	12 – 60
Wall Thickness	2.2 mm	1.2 – 4
Floor Thickness	2.4 mm	1.2 – 6
Corner Radius	4 mm	0 – 10
Cover Thickness	2.6 mm	1.2 – 8
Print Clearance	0.3 mm	0.1 – 0.6
Parting Gap (housing to cover)	1.2 mm	0.4 – 8
Break-off Tab Width	5 mm	1 – 15
Break-off Tab Thickness	1 mm	0.3 – 3
Tab Embed Depth	1 mm	0.4 – 3
Tab Position (Y)	12 mm	4 – 20
Screw Shank Dia	3 mm	1.6 – 5
Screw Length	10 mm	4 – 30
Screw Head Dia	5.5 mm	2.5 – 12
Screw Head Height	2 mm	0.5 – 6
Boss Diameter	7 mm	3 – 14
Boss Inset from Side (X)	6 mm	3 – 20
Boss Inset from Side (Y)	6 mm	3 – 20
Pilot Hole Depth	8 mm	2 – 20
PCB Post Dia	5 mm	2 – 12
PCB Post Height	5 mm	1 – 15
Post Pilot Hole Dia	2.7 mm	1 – 6
Post Pilot Hole Depth	3 mm	0.5 – 8
Post Inset from Board Edge	2.5 mm	0.5 – 10
ESP32 Board Length	55 mm	20 – 90
ESP32 Board Width	28 mm	12 – 60
ESP32 Centre X	-30 mm	-100 – 100
ESP32 Centre Y	0 mm	-40 – 40
Micro-SD Module Length (X)	26 mm	12 – 60
Micro-SD Module Width (Y)	21 mm	10 – 50
Micro-SD Module Centre X	12.5 mm	-100 – 100
Micro-SD Module Centre Y	0 mm	-40 – 40
MAX31865 Module Length (X)	30 mm	12 – 60
MAX31865 Module Width (Y)	25 mm	10 – 60
MAX31865 Module Centre X	42.5 mm	-100 – 100
MAX31865 Module Centre Y	0 mm	-40 – 40
USB Slot Width	12 mm	4 – 25
USB Slot Height	6 mm	2 – 14
USB Slot Centre Z	7.5 mm	2 – 40
Micro-SD Slot Width	16 mm	6 – 35
Micro-SD Slot Height	4 mm	1.5 – 12
Micro-SD Slot Centre Z	7.5 mm	2 – 40
PT100 Cable Hole Dia	6 mm	2 – 16
PT100 Cable Hole Centre Z	7 mm	2 – 40
OLED Recess Width	30 mm	10 – 70
OLED Recess Depth (Y)	30 mm	10 – 70
OLED Recess Depth (Z)	1.4 mm	0.3 – 4
OLED Window Width	22 mm	8 – 60
OLED Window Height (Y)	12 mm	5 – 40
OLED Centre X	0 mm	-80 – 80
OLED Centre Y	6 mm	-40 – 40
Encoder Shaft Hole Dia	7.2 mm	3 – 20
Encoder Centre X	0 mm	-80 – 80
Encoder Centre Y	-14.5 mm	-40 – 40
Encoder Tab Slot Width	3 mm	1 – 10
Encoder Tab Slot Length	2 mm	0.5 – 10
Encoder Tab Slot Offset	6.5 mm	0 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS