Loading the interactive model…
Interactive 3D model of ESP32-S3 Dev Board HolderEverything else
ESP32-S3 Dev Board Holder
1 views
- Bounding box
- 64.0 × 37.0 × 12.6 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 1, 2026
Download
Free to download and use. See the terms.
The prompt
i need to fit a ESP32 S3 Development Board 2.4G WiFi BT Module Internet of Things ESP32-S3-WROOM-1 N16R8 MCU 44Pin 8M PSRAM
Parameters
| Name | Value | Range |
|---|---|---|
| Board Length | 55 mm | 30 – 100 |
| Board Width | 28 mm | 15 – 80 |
| Board Thickness | 1.6 mm | 0.8 – 3 |
| Corner Inset | 3.5 mm | 2 – 10 |
| Mount Hole Dia | 3.2 mm | 2 – 6 |
| Standoff Height | 6 mm | 2 – 15 |
| Standoff Diameter | 6 mm | 4 – 12 |
| Base Thickness | 3 mm | 1 – 8 |
| Wall Thickness | 2.5 mm | 1 – 6 |
| Board Margin | 2 mm | 0.5 – 5 |
| Retention Lip | 2 mm | 0 – 5 |
| Module Cutout Length | 26 mm | 0 – 50 |
| Module Cutout Width | 19 mm | 0 – 40 |
| Module Cutout Offset X | 0 mm | -25 – 25 |
| USB Cutout Width | 12 mm | 0 – 25 |
| Fillet Radius | 1.5 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS