ESP32-S3 + 2x LM2596 Enclosure with Hinged Lid

1 views

Bounding box: 90.0 × 75.1 × 35.4 mm
Engine: Precision B-rep
Parameters: 24
Published: October 17, 2026

Download

Free to download and use. See the terms.

The prompt

Erstelle ein Gehäuse für esp32-3s und 2x lm2596 mit deckel

Parameters

Name	Value	Range
Internal Length	85 mm	40 – 200
Internal Width	70 mm	30 – 150
Internal Height	30 mm	15 – 80
Wall Thickness	2.5 mm	1 – 5
Bottom Thickness	2.5 mm	1 – 5
Lid Thickness	2.5 mm	1 – 5
Hinge Gap	0.4 mm	0.1 – 1
Lip Thickness	1.5 mm	0.5 – 3
Lip Height	2 mm	0.5 – 5
Lip Clearance	0.3 mm	0.1 – 1
Hinge Width	30 mm	10 – 80
Hinge Depth	1 mm	0.5 – 3
Screw Boss Diameter	6 mm	3 – 10
Screw Clearance Hole Dia	3.2 mm	2 – 5
Screw Pilot Hole Dia	2.5 mm	1.5 – 4
Boss Edge Offset from Wall	2 mm	0.5 – 5
Board Boss Diameter	5 mm	3 – 8
Board Boss Height	3 mm	1 – 8
Board Mounting Hole Dia	2.5 mm	1.5 – 4
Board Mount Spacing X	60 mm	20 – 150
Board Mount Spacing Y	40 mm	20 – 100
Cable Slot Width	20 mm	5 – 50
Cable Slot Height	8 mm	3 – 20
Cable Slot Center Height	15 mm	5 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS