Everything else
ESP32-S3 + 1.69in TFT Enclosure
- Bounding box
- 48.0 × 78.0 × 21.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Make a casing for ESP32-S3 and 1.69" tft module, with switches and provisions for USB C connection
Parameters
| Name | Value | Range |
|---|---|---|
| Case Width (X) | 48 mm | 30 – 80 |
| Case Length (Y) | 78 mm | 50 – 120 |
| Base Height | 16 mm | 8 – 40 |
| Wall Thickness | 2 mm | 1 – 4 |
| Floor Thickness | 2 mm | 1 – 5 |
| Lid Thickness | 5 mm | 2 – 10 |
| PCB Width | 25.5 mm | 15 – 40 |
| PCB Length | 64 mm | 30 – 90 |
| PCB Thickness | 1.6 mm | 1 – 3 |
| Standoff Height | 3 mm | 1 – 10 |
| Standoff Diameter | 4.5 mm | 2 – 8 |
| PCB to USB Wall Gap | 1 mm | 0.2 – 6 |
| Tactile Switch Height | 3.5 mm | 2 – 5.5 |
| TFT Module Width | 33.5 mm | 20 – 50 |
| TFT Module Height | 41.5 mm | 20 – 60 |
| Pocket Clearance | 0.6 mm | 0.2 – 2 |
| Bezel Pocket Depth | 3.8 mm | 1 – 8 |
| Window Width | 29 mm | 15 – 45 |
| Window Height | 33.6 mm | 15 – 55 |
| Window Y Offset | -14 mm | -30 – 0 |
| USB-C Slot Width | 9.4 mm | 5 – 15 |
| USB-C Slot Height | 3.6 mm | 2 – 8 |
| Slot Corner Radius | 0.8 mm | 0 – 1.5 |
| Connector Centre above PCB | 1.6 mm | 0 – 6 |
| Button Count | 2 pcs | 1 – 4 |
| First Button Y | 12 mm | -20 – 40 |
| Button Spacing | 10 mm | 5 – 20 |
| Button Well Diameter | 6 mm | 3 – 12 |
| Membrane Thickness | 1.2 mm | 0.6 – 3 |
| Plunger Diameter | 3.6 mm | 2 – 6 |
| Plunger-to-Switch Gap | 0.2 mm | 0 – 1.5 |
| Screw Boss Diameter | 7 mm | 4 – 12 |
| Screw Inset from Edge | 4.5 mm | 3 – 10 |
| Pilot Hole Diameter | 2.2 mm | 1 – 4 |
| Pilot Hole Depth | 8 mm | 2 – 14 |
| Lid Clearance Hole | 2.7 mm | 1.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm