Brackets and mounts
ESP32 Enclosure with Internal Dividers
- Bounding box
- 118.8 × 70.0 × 57.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 25, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the box geometry to add internal dividers and mounting features: 1. Create an inner base partition grid: a lower recessed tray on the front bottom, and a raised platform on the rear bottom. 2. On the raised platform, add 4 vertical mounting pillars (standoffs) with snap clips designed to hold an ESP32 board. 3. Add an internal rectangular box compartment (30mm x 30mm x 20mm height) adjacent to the ESP32 mount. 4. Keep the front wall holes (12mm) for USB cable, the rear wall hole (5mm) for RGB LED, and the side cutout mounts for external MQ-2 and DHT22 sensors.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 110 mm | 80 – 150 |
| Outer Width | 70 mm | 50 – 100 |
| Outer Height | 50 mm | 30 – 80 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| USB Hole Diameter | 12 mm | 8 – 20 |
| LED Hole Diameter | 5 mm | 3 – 10 |
| Standoff Height | 8 mm | 4 – 15 |
| Standoff Diameter | 6 mm | 4 – 10 |
| Screw Hole Diameter | 3 mm | 2 – 5 |
| Front Tray Depth | 5 mm | 2 – 10 |
| Rear Platform Height | 8 mm | 4 – 15 |
| Pillar Diameter | 6 mm | 4 – 10 |
| Pillar Height | 10 mm | 5 – 20 |
| Compartment Length | 30 mm | 20 – 50 |
| Compartment Width | 30 mm | 20 – 50 |
| Compartment Height | 20 mm | 10 – 40 |
| Clip Thickness | 2 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent