Brackets and mounts
ESP32 Electronics Enclosure
- Bounding box
- 118.8 × 70.0 × 57.5 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 25, 2026
Download
Free to download and use. See the terms.
The prompt
Empty 3D printable rectangular electronics enclosure box for an ESP32 project, shown without any electronic components inside. Outer dimensions: 110mm x 70mm x 50mm, wall thickness 2.5mm, open top design. The interior features empty mounting standoffs with clips for an ESP32 NodeMCU, and molded compartments/recesses for circuit boards. Front wall has a 12mm circular hole for USB cable access. Side walls include empty mounting brackets, cutouts, and screw holes to mount external MQ-2 and DHT22 sensors. Back wall has a 5mm circular hole for an RGB LED bulb. Technical CAD model render style on a light background.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 110 mm | 80 – 200 |
| Outer Width | 70 mm | 50 – 150 |
| Outer Height | 50 mm | 30 – 100 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| USB Hole Diameter | 12 mm | 8 – 20 |
| LED Hole Diameter | 5 mm | 3 – 10 |
| Standoff Height | 8 mm | 4 – 15 |
| Standoff Diameter | 6 mm | 4 – 10 |
| Screw Hole Diameter | 3.2 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent