Everything else
ESP32 electronics deck 66x36
- Bounding box
- 66 × 36 × 3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Small flat 3D-printable electronics deck, 66x36x3 mm, R4 corners, four 3.2 mm holes, two 39x3.4 header slots at Y +/-12.7, 0.4 mm engraved outline of 51.5x28.3 board on top.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck length X | 66 mm | 40 – 120 |
| Deck width Y | 36 mm | 24 – 80 |
| Thickness | 3 mm | 1.5 – 6 |
| Corner radius | 4 mm | 1 – 10 |
| Hole diameter incl. clearance | 3.2 mm | 2.5 – 4.5 |
| Hole X offset | 28.5 mm | 10 – 40 |
| Hole Y offset | 13.5 mm | 5 – 25 |
| Slot length X | 39 mm | 20 – 60 |
| Slot width Y | 3.4 mm | 2 – 6 |
| Slot centre Y offset | 12.7 mm | 5 – 20 |
| Board length X | 51.5 mm | 30 – 70 |
| Board width Y | 28.3 mm | 15 – 50 |
| Engrave depth | 0.4 mm | 0.2 – 1 |
| Outline line width | 0.6 mm | 0.4 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm