3D preview of ESP32 / DS18B20 Enclosure with Press-Fit Lid
Loading the interactive model…
Interactive 3D model of ESP32 / DS18B20 Enclosure with Press-Fit Lid

Everything else

ESP32 / DS18B20 Enclosure with Press-Fit Lid

1 views
Bounding box
99.0 × 49.0 × 32.0 mm
Engine
Precision B-rep
Parameters
13
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

// إعدادات العلبة (المقاسات بالمليمتر) inner_l = 95; // الطول الداخلي (يكفي ESP32 + الموديول + الأسلاك) inner_w = 45; // العرض الداخلي inner_h = 28; // الارتفاع الداخلي wall = 2; // سماكة الجدار tol = 0.25; // خلوص الغطاء عشان يدخل كبس بسلاسة $fn = 40; // 1. جسم العلبة الرئيسي difference() { // الصندوق الخارجي cube([inner_l + wall*2, inner_w + wall*2, inner_h + wall]); // التفريغ الداخلي translate([wall, wall, wall]) cube([inner_l, inner_w, inner_h + 1]); // فتحة Micro-USB في الجدار الأمامي translate([-1, (inner_w + wall*2)/2 - 6, wall + 4]) cube([wall + 2, 12, 8]); // فتحة سلك حساس DS18B20 في الجدار الخلفي (قطر 5 مم) translate([inner_l + wall - 1, (inner_w + wall*2)/2, wall + 10]) rotate([0, 90, 0]) cylinder(h = wall + 2, d = 5); } // 2. الغطاء (موضوع بجانب العلبة ليُطبع معها في نفس الوقت) translate([0, inner_w + wall*2 + 10, 0]) { // سطح الغطاء العلوي cube([inner_l + wall*2, inner_w + wall*2, wall]); // حافة الكبس الداخلية translate([wall + tol, wall + tol, wall]) difference() { cube([inner_l - tol*2, inner_w - tol*2, 3]); translate([1.5, 1.5, -0.5]) cube([inner_l - tol*2 - 3, inner_w - tol*2 - 3, 4]); } }

Parameters

NameValueRange
Internal Length95 mm40 – 250
Internal Width45 mm20 – 150
Internal Depth28 mm10 – 100
Wall / Floor Thickness2 mm1.2 – 6
Outer Corner Radius2 mm0 – 8
Lid Clearance (per side)0.25 mm0.05 – 1
Lid Lip Height3 mm1 – 12
Lid Lip Wall Thickness1.5 mm0.8 – 4
Micro-USB Slot Width12 mm4 – 30
Micro-USB Slot Height8 mm3 – 20
Micro-USB Slot Centre Height10 mm4 – 26
Sensor Cable Hole Diameter5 mm1 – 15
Sensor Hole Centre Height12 mm3 – 27

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

ESP32 / DS18B20 Enclosure with Press-Fit Lid - Free CAD Model (STEP, STL) | TextoCAD