Brackets and mounts
ESP32 Case - Front/Rear Halves with Spring Clips
- Bounding box
- 90.0 × 34.8 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
ESPECIFICAÇÃO TÉCNICA Corpo: Prisma retangular, 90mm (comprimento) x 30mm (largura) x 40mm (altura) Arestas verticais e horizontais com fillet de raio 2mm (apenas quebra de quina, faces permanecem planas) Divisão: Split vertical, plano paralelo às faces de 40x90mm, posicionado no centro da largura (15mm) Resulta em duas peças: metade frontal (0–15mm) e metade traseira (15–30mm) Junta com encaixe macho-fêmea: ressalto de 1mm x 1mm em uma metade, rebaixo correspondente na outra, percorrendo todo o perímetro da linha de corte Superfícies externas: Sem furos, recortes ou aberturas em nenhuma face Clipe (2 unidades, face traseira): Base fixa na face traseira, próxima a cada extremidade do comprimento Perfil em corte transversal: sai da superfície, curva 180°, retorna paralelo à face com espaçamento de 1–1.5mm entre a lâmina de retorno e a superfície traseira Espessura da lâmina: 1.5–2mm Comprimento do clipe (eixo do comprimento da case): 15mm Interior: Cavidade oca, dimensionada para: placa WeMos ESP32 WiFi & Bluetooth Battery, LED RGB, sensor MPU6050, motor de vibração Nenhum recorte para chave on-off, Micro-USB ou LED — usinagem manual pós-impressão
Parameters
| Name | Value | Range |
|---|---|---|
| Case length (X) | 90 mm | 60 – 200 |
| Case width (Y) | 30 mm | 20 – 100 |
| Case height (Z) | 40 mm | 32 – 120 |
| Edge fillet radius | 2 mm | 0.5 – 5 |
| Wall thickness (cavity) | 2.5 mm | 1 – 6 |
| Tongue & groove size | 1 mm | 0.5 – 3 |
| Clip strip thickness | 1.75 mm | 1 – 3 |
| Clip gap | 1.25 mm | 0.75 – 2.5 |
| Clip length (X) | 15 mm | 5 – 25 |
| Clip blade length | 9 mm | 4 – 15 |
| Clip offset from end | 8 mm | 0 – 20 |
| Clip base height on rear face | 9 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu