Brackets and mounts
ESP32-8048S050 Two-Piece Wall Panel Enclosure (Top + Bottom Cover)
- Bounding box
- 292.0 × 82.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a premium two-piece enclosure for an ESP32-8048S050 5-inch touchscreen module. DESIGN GOAL - Modern smart-home control panel appearance. - Similar style to Google Nest Hub, Lenovo Smart Display, or professional wall-mounted HMI panel. - Clean minimalist industrial design. - Front surface should appear almost entirely display. TOP COVER - Extremely thin bezel. - Uniform bezel width 1.0 mm on all four sides. - Flat front face. - No recessed display window. - No decorative features. - No visible fasteners on front. - Display sits directly behind bezel. - Display front surface recessed only 0.5 mm below enclosure face. - Corner radius 8 mm. - Wall thickness 2.0 mm. - Internal alignment pins. BOTTOM COVER - Smooth rear surface. - Wall thickness 2.5 mm. - Internal clearance 12 mm minimum. - Four M3 PCB standoffs. - M3 screw bosses. - PCB mounted to bottom cover. - Connector access cutouts only where required. - No vent slots. - No grille openings. - Hidden assembly hardware. MOUNTING - Rear keyhole wall mounting slots. - 75 mm x 75 mm VESA mounting pattern. - Maintain fully flat rear mounting surface. - Enclosure depth as thin as possible while clearing components. ASSEMBLY - Four M3 screws hidden from front. - Top and bottom alignment features. - 0.3 mm clearance between mating parts. - Optimized for repeated assembly. PRINTING - Designed for FDM printing. - PLA, PETG, or ABS compatible. - No supports required. - 0.4 mm nozzle optimized. - 0.2 mm layer height. APPEARANCE - Professional commercial product look. - Tablet-style front. - Nearly bezel-less display. - Clean wall-mounted smart panel aesthetic. - No logos. - No decorations. - Focus on premium appearance and simple manufacturing. Output separate bodies: 1. Top Cover 2. Bottom Cover
Parameters
| Name | Value | Range |
|---|---|---|
| Top Cover Width | 126 mm | 80 – 220 |
| Top Cover Height | 82 mm | 60 – 180 |
| Top Cover Depth | 9 mm | 5 – 30 |
| Corner Radius | 8 mm | 2 – 20 |
| Top Cover Wall | 2 mm | 1.2 – 5 |
| Front Plate Thickness | 2 mm | 1 – 5 |
| Visible Bezel Width | 1 mm | 0.4 – 5 |
| Display Recess Depth | 0.5 mm | 0.2 – 2 |
| Display Glass Width | 112 mm | 60 – 200 |
| Display Glass Height | 68 mm | 40 – 140 |
| Bottom Cover Width | 126 mm | 80 – 220 |
| Bottom Cover Height | 82 mm | 60 – 180 |
| Bottom Cover Depth | 14 mm | 6 – 40 |
| Bottom Cover Wall | 2.5 mm | 1.2 – 6 |
| PCB Standoff Diameter | 6 mm | 3 – 12 |
| PCB Standoff Height | 5 mm | 2 – 15 |
| PCB Pilot Hole Diameter | 2.5 mm | 1.5 – 4 |
| VESA Pitch (square) | 75 mm | 50 – 200 |
| Keyhole Head Diameter | 6.2 mm | 3 – 10 |
| Keyhole Slot Width | 4.2 mm | 2 – 8 |
| Keyhole Slot Length | 6 mm | 2 – 15 |
| USB-C Cutout Width | 9.5 mm | 4 – 22 |
| USB-C Cutout Height | 3.5 mm | 1.5 – 10 |
| microSD Cutout Width | 12 mm | 4 – 22 |
| microSD Cutout Height | 2.5 mm | 1 – 8 |
| M3 Boss Diameter | 7 mm | 5 – 12 |
| M3 Clearance Hole | 3.4 mm | 2.8 – 4.5 |
| M3 Thread-Forming Hole | 2.5 mm | 1.8 – 3.2 |
| Alignment Pin Diameter | 3 mm | 1.5 – 6 |
| Alignment Pin Length | 4 mm | 1.5 – 10 |
| Exploded Layout Gap | 40 mm | 5 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu