ESP32-8048S050 Enclosure (no vents)

1 views

Bounding box: 321.0 × 94.0 × 23.0 mm
Engine: Precision B-rep
Parameters: 45
Published: October 21, 2026

Download

Free to download and use. See the terms.

The prompt

remove vent slots

Parameters

Name	Value	Range
Outer Width (X)	148 mm	100 – 300
Outer Depth (Y)	94 mm	70 – 250
Wall Thickness	2.5 mm	1.2 – 5
Top Cover Height	12 mm	6 – 40
Bottom Cover Height	22 mm	10 – 60
Front Plate Thickness	3 mm	1.5 – 8
Print Layout Gap	25 mm	5 – 100
LCD Window Width	110 mm	40 – 200
LCD Window Height	67 mm	30 – 150
Display Ledge Margin	3 mm	1 – 12
Display Recess Depth	1.5 mm	0.5 – 5
PCB Hole X Offset	62 mm	10 – 140
PCB Hole Y Offset	36 mm	8 – 100
Standoff Diameter	6.5 mm	3 – 15
Standoff Height	6 mm	2 – 20
M3 Clearance Hole	3.4 mm	2 – 6
Insert Boss Diameter	7 mm	4 – 16
Insert Boss Height	6 mm	2 – 20
Heat-Set Insert Bore	4.2 mm	2.5 – 8
Heat-Set Insert Depth	4 mm	1 – 10
Alignment Pin Diameter	3 mm	1.5 – 8
Alignment Pin Length	10 mm	3 – 20
Pin X Offset	66.5 mm	10 – 140
Pin Y Offset	39.5 mm	8 – 100
Alignment Pillar Dia	6 mm	3 – 14
Pillar Pin Bore	3.2 mm	1.5 – 6
Pillar Pin Bore Depth	1.5 mm	0.5 – 10
USB Opening Width	12 mm	5 – 30
USB Opening Height	11 mm	4 – 25
USB Opening Y	-15 mm	-45 – 45
USB Opening Z	9 mm	3 – 20
Power Opening Width	10 mm	4 – 30
Power Opening Height	12 mm	4 – 25
Power Opening Y	15 mm	-45 – 45
Power Opening Z	9 mm	3 – 20
SD Opening Width	14 mm	5 – 30
SD Opening Height	6 mm	3 – 20
SD Opening X	40 mm	-70 – 70
SD Opening Z	6 mm	3 – 20
Cable Slot Width	10 mm	4 – 30
Cable Slot Height	6 mm	3 – 20
Cable Slot X	-40 mm	-70 – 70
Cable Slot Z	6 mm	3 – 20
Outer Corner Radius	8 mm	0.5 – 15
Print-Bed Chamfer	1 mm	0.2 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS