Brackets and mounts
EOS 600D Dual-Side Handheld Camera Grip
- Bounding box
- 200.0 × 85.0 × 119.5 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- October 4, 2026
Download
Free to download and use. See the terms.
The prompt
Improve the current model before exporting it. Keep the current simple design: - one horizontal base plate - two symmetrical vertical side handles - two triangular reinforcement gussets - no camera cage - no 15 mm rods - no matte box - no lens holder - no extra accessories The design is for a Canon EOS 600D DSLR camera. The camera body is approximately 133.1 mm wide, 99.5 mm high and 79.7 mm deep. Make these changes: 1. Make the base plate 15 mm thick. 2. Keep the total width below 210 mm. 3. Make both handles symmetrical. 4. Make each handle approximately 32 mm wide, 30 mm deep and 100 mm tall. 5. Round all handle edges with 6 mm fillets. 6. Make both triangular gussets at least 10 mm thick. 7. Add an ergonomic oval shape to both handles. 8. Angle both handles outward by 8 degrees. 9. Add one centered mounting slot in the base plate for a real metal 1/4-20 UNC camera screw. 10. Make the mounting slot 30 mm long and 9 mm wide so the camera can be moved slightly forwards and backwards. 11. Add a 20 mm diameter and 2 mm deep recess around the slot for a metal washer. 12. Do not use plastic threads. The camera must be held by a real metal 1/4-20 camera screw and metal washer. 13. Add a 3 mm deep recess on top of the base plate for a thin rubber or TPU pad. 14. Keep the camera battery door accessible. Do not create solid material directly under the central and rear underside of the camera. 15. If the exact battery-door location is unknown, create a large open recess under the camera instead of guessing its position. 16. Keep at least 8 mm of solid material around the camera screw slot. 17. Make the model suitable for FDM printing in PETG. 18. Make the final model strong enough for a Canon EOS 600D with a small or medium lens. 19. Keep the part printable on a 220 x 220 mm print bed. 20. Export both an STL file and an editable STEP file. Show the updated model and list all final dimensions before exporting.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Width | 200 mm | 150 – 210 |
| Base Plate Depth | 85 mm | 60 – 120 |
| Base Plate Thickness | 15 mm | 8 – 25 |
| Base Corner Fillet | 6 mm | 0 – 10 |
| Mounting Slot Length | 30 mm | 15 – 60 |
| Mounting Slot Width | 9 mm | 6.5 – 15 |
| Handle Height | 100 mm | 60 – 140 |
| Handle Width | 32 mm | 20 – 45 |
| Handle Depth | 30 mm | 18 – 45 |
| Inside Distance Between Handles | 110 mm | 80 – 160 |
| Handle Edge Fillet | 6 mm | 0 – 12 |
| Handle Oval Radius (Vertical Edges) | 12 mm | 0 – 14 |
| Handle Outward Angle | 8 deg | 0 – 15 |
| Gusset Thickness | 10 mm | 4 – 20 |
| Gusset Leg Length | 40 mm | 15 – 70 |
| Gusset Fillet | 3 mm | 0 – 6 |
| Rubber Pad Recess Depth | 3 mm | 0 – 8 |
| Washer Recess Diameter | 20 mm | 12 – 32 |
| Washer Recess Depth | 2 mm | 0 – 6 |
| Min Solid Around Slot | 8 mm | 6 – 14 |
| Metal Washer OD | 20 mm | 12 – 32 |
| Metal Washer ID | 6.6 mm | 6.4 – 12 |
| Metal Washer Thickness | 2 mm | 0.5 – 5 |
| Screw Length (Head+Shank) | 25 mm | 15 – 45 |
| Screw Head Diameter | 12 mm | 8 – 20 |
| Screw Head Thickness | 3 mm | 1 – 6 |
| Screw Shank Diameter (1/4-20) | 6.35 mm | 4 – 10 |
| TPU Pad Length | 120 mm | 60 – 180 |
| TPU Pad Width | 60 mm | 30 – 80 |
| TPU Pad Thickness | 3 mm | 1 – 6 |
| Pad Clearance Width | 24 mm | 5 – 40 |
| Pad Clearance Depth | 24 mm | 5 – 40 |
| Pad Clearance Y Offset | 0 mm | -30 – 30 |
| Battery Relief Width | 140 mm | 40 – 180 |
| Battery Relief Depth (Y) | 32 mm | 15 – 70 |
| Battery Relief Y Offset | -25 mm | -40 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu