Loading the interactive model…
Interactive 3D model of Endo Head & Neck AssemblyEverything else
Endo Head & Neck Assembly
14 views
- Bounding box
- 244.0 × 240.0 × 407.5 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
arduino uno and pca9685 (mg90s, and mg996R) to make an animatronic similar to fnaf endo head and neck
Parameters
| Name | Value | Range |
|---|---|---|
| Base side | 120 mm | 50 – 200 |
| Base thickness | 5 mm | 2 – 15 |
| Tube OD | 80 mm | 30 – 120 |
| Tube height | 180 mm | 100 – 300 |
| Tube wall thickness | 5 mm | 2 – 10 |
| Skull width (X) | 220 mm | 100 – 300 |
| Skull depth (Y) | 180 mm | 80 – 250 |
| Skull height (Z) | 220 mm | 100 – 350 |
| Skull wall thickness | 5 mm | 2 – 10 |
| Eye socket diameter | 45 mm | 20 – 80 |
| Eye socket spacing | 77 mm | 30 – 150 |
| Eye socket height fraction | 0.65 | 0.3 – 0.9 |
| Hinge lug width (X protrusion) | 12 mm | 5 – 30 |
| Hinge lug depth (Y) | 15 mm | 5 – 30 |
| Hinge lug height (Z) | 20 mm | 10 – 40 |
| Hinge hole diameter | 6 mm | 3 – 12 |
| Hinge lug Y offset from front | 0 mm | -20 – 20 |
| Hinge lug Z offset from bottom | 25 mm | 5 – 80 |
| Jaw length (X) | 120 mm | 80 – 200 |
| Jaw depth (Y) | 60 mm | 30 – 100 |
| Jaw height (Z) | 80 mm | 40 – 120 |
| Tooth count | 8 | 4 – 16 |
| Tooth cut depth (Y) | 8 mm | 3 – 20 |
| Tooth cut height (Z) | 10 mm | 4 – 25 |
| Jaw hinge lug width (X) | 10 mm | 4 – 20 |
| Jaw hinge lug depth (Y) | 15 mm | 5 – 30 |
| Jaw hinge lug height (Z) | 18 mm | 8 – 35 |
| Jaw hinge hole diameter | 6 mm | 3 – 12 |
| Jaw hinge Y local (from front) | 40 mm | 20 – 80 |
| Jaw hinge Z local (from bottom) | 20 mm | 5 – 60 |
| MG996R width (X) | 40.7 mm | 30 – 60 |
| MG996R depth (Y) | 19.7 mm | 10 – 30 |
| MG996R height (Z) | 42.9 mm | 30 – 60 |
| MG996R shaft diameter | 6 mm | 3 – 10 |
| MG996R shaft height | 8 mm | 3 – 15 |
| MG90S width (X) | 22.8 mm | 15 – 40 |
| MG90S depth (Y) | 12.2 mm | 8 – 20 |
| MG90S height (Z) | 28.5 mm | 20 – 40 |
| MG90S shaft diameter | 4 mm | 2 – 8 |
| MG90S shaft height | 5 mm | 2 – 10 |
| PCA9685 width (X) | 62 mm | 40 – 80 |
| PCA9685 depth (Y) | 41 mm | 25 – 60 |
| PCA9685 height (Z) | 12 mm | 5 – 25 |
| Arduino Uno width (X) | 68.6 mm | 40 – 100 |
| Arduino Uno depth (Y) | 15 mm | 10 – 30 |
| Arduino Uno height (Z) | 53.4 mm | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS