Ellipsoidal Eye Blank with Iris and Pupil

1 views

Bounding box: 209.9 × 83 × 10.0 mm
Engine: 3D Printing B-rep
Parameters: 12
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

要橢圓球狀,瞳孔中心往四邊下降到最低厚度0.1cm

Parameters

Name	Value	Range
Length along X	210 mm	50 – 400
Width along Y	83 mm	20 – 200
Minimum edge thickness (0.1cm = 1mm)	1 mm	0.5 – 10
Center dome bulge height	9 mm	1 – 40
Bottom edge chamfer	0.3 mm	0 – 2
Iris diameter (nominal)	130 mm	20 – 180
Eye ring left around the iris	3 mm	1 – 15
Iris recess depth into eye blank	2 mm	0.5 – 5
Pupil diameter (nominal)	85 mm	10 – 120
Ring left around the pupil	3 mm	1 – 15
Pupil recess depth into iris/eye	2.5 mm	0.5 – 5
Clearance for interlocking fit	0.15 mm	0 – 0.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS