Brackets and mounts
Elevator Lobby Wall with Smart Display
- Bounding box
- 5200 × 1600 × 2850 mm
- Engine
- 3D Printing B-rep
- Parameters
- 40
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Build a multi-part 3D architectural CAD assembly of an elevator lobby wall with a wall-mounted smart display panel, aligned in a single straight coplanar line along the X-axis. Include: (1) a flat rectangular floor slab (5200mm x 1600mm x 50mm); (2) three concrete pillars (2800mm tall) separated by two recessed elevator bays (1100mm wide, 2200mm tall) with double-leaf sliding doors; (3) on the far-left pillar, a square sign (280mm x 300mm x 10mm) above a vertical call-button plate (120mm x 280mm x 12mm) with two circular buttons; (4) a closed three-compartment rectangular recycling bin (720mm x 820mm x 420mm) with three raised front decal rectangles placed in front of the right half of the center pillar; and (5) mounted on the left half of the center pillar at 1600mm height, a rectangular display panel (460mm x 680mm x 16mm) offset 15mm by four cylindrical corner standoffs, featuring a raised outer border frame, embossed header text reading "FIND YOUR STUDY FLOOR", 8 circular recessed LED bezels arranged in a 3-3-2 grid (1ST to 8TH), and two smaller circular LED bezels inset 85mm from the bottom corners labeled "QUIET" and "BUSY". Export all components as separate solid bodies.
Parameters
| Name | Value | Range |
|---|---|---|
| Floor length | 5200 mm | 2000 – 8000 |
| Floor depth | 1600 mm | 600 – 3000 |
| Floor slab thickness | 50 mm | 10 – 200 |
| Pillar width | 1000 mm | 400 – 2000 |
| Pillar depth | 300 mm | 100 – 800 |
| Pillar height | 2800 mm | 1500 – 4000 |
| Elevator bay width | 1100 mm | 600 – 2500 |
| Elevator bay height | 2200 mm | 800 – 3000 |
| Door leaf thickness | 40 mm | 10 – 100 |
| Gap between door leaves | 6 mm | 2 – 20 |
| Sign width | 280 mm | 100 – 600 |
| Sign height | 300 mm | 100 – 600 |
| Sign thickness | 10 mm | 3 – 30 |
| Sign bottom height | 1300 mm | 200 – 2600 |
| Button plate width | 120 mm | 60 – 400 |
| Button plate height | 280 mm | 100 – 600 |
| Button plate thickness | 12 mm | 4 – 40 |
| Button plate bottom height | 950 mm | 100 – 2400 |
| Button diameter | 35 mm | 15 – 80 |
| Button protrusion | 6 mm | 2 – 20 |
| Bin width | 720 mm | 300 – 1200 |
| Bin height | 820 mm | 400 – 1400 |
| Bin depth | 420 mm | 200 – 800 |
| Decal width | 180 mm | 40 – 400 |
| Decal height | 120 mm | 30 – 300 |
| Decal relief | 2 mm | 1 – 6 |
| Backplate width | 460 mm | 200 – 900 |
| Backplate height | 680 mm | 300 – 1200 |
| Backplate thickness | 16 mm | 6 – 50 |
| Display centre height | 1600 mm | 600 – 2400 |
| Standoff diameter | 20 mm | 8 – 50 |
| Standoff length | 15 mm | 5 – 60 |
| Border frame width | 20 mm | 5 – 60 |
| Border frame relief | 5 mm | 2 – 20 |
| LED bezel diameter | 40 mm | 15 – 80 |
| Small LED bezel diameter | 28 mm | 10 – 60 |
| LED bezel relief | 3 mm | 1 – 10 |
| LED grid column spacing | 130 mm | 60 – 200 |
| LED grid row spacing | 160 mm | 80 – 250 |
| QUIET/BUSY corner inset | 85 mm | 30 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
