Brackets and mounts
Electronics Housing Assembly
- Bounding box
- 112.0 × 84.5 × 27.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical Description The boîtier (housing) features a durable, modular design optimized for electronics protection and mounting. Form Factor: The housing has a rectangular, slightly rounded design. While you specified 6cm x 8cm, the assembly includes a mounting plate that extends beyond the core sensor body. External Construction: The exterior features two prominent, recessed circular openings designed to house sensor components (likely ultrasonic transducers). The side profile shows a contoured design to accommodate internal components. Internal Components: The device contains a custom printed circuit board (PCB). It features integrated battery compartments with spring contacts, indicating it is powered by batteries. Mounting and Assembly: The unit utilizes a flat, rear-mounted backplate for installation. The assembly is secured using multiple screws, suggesting a robust mechanical attachment to the desired surface. Internal structural supports (molded standoffs) are visible within the housing to properly align and secure the PCB. This mechanical design is consistent with equipment intended for harsh environments, such as smart waste management monitoring, where the housing protects sensitive electronics from physical impact and environmental factors.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Width | 80 mm | 40 – 200 |
| Housing Length | 60 mm | 30 – 200 |
| Housing Depth | 25 mm | 10 – 50 |
| Corner Radius | 5 mm | 0 – 10 |
| Recess Diameter | 18 mm | 5 – 40 |
| Recess Depth | 5 mm | 1 – 10 |
| Recess Y Offset (from edge) | 15 mm | 5 – 30 |
| Cavity Wall Thickness | 2 mm | 1 – 5 |
| Standoff Height | 10 mm | 3 – 20 |
| Standoff Diameter | 4 mm | 2 – 8 |
| Standoff X Margin (from interior wall) | 8 mm | 2 – 20 |
| Standoff Y Margin (from interior wall) | 8 mm | 2 – 20 |
| Battery X Offset (from center) | 15 mm | 5 – 30 |
| Contact Y Half-Length | 23 mm | 10 – 30 |
| Contact Height | 3 mm | 1 – 8 |
| Contact Diameter | 3 mm | 1 – 6 |
| Backplate Width | 80 mm | 40 – 200 |
| Backplate Length | 60 mm | 30 – 200 |
| Backplate Thickness | 2 mm | 1 – 5 |
| Screw Hole Diameter | 3 mm | 1 – 6 |
| Hole X Margin (from edge) | 5 mm | 2 – 15 |
| Hole Y Margin (from edge) | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu