Electronics Enclosure Assembly

1 views

Bounding box: 242.5 × 260.5 × 104 mm
Engine: 3D Printing B-rep
Parameters: 24
Published: November 10, 2026

Download

Free to download and use. See the terms.

The prompt

materiale all'interno della scatola misure Pacco batteria 78*58*98 mm Stepdown 57*68*51 mm Camera 35*35 mm Rf 130*90*20 mm Stare largo PCB 160*100 mm scatola esterna 29*29 scatola interna 27*27 diagonale 38,18 mezza diagonale 19,09

Parameters

Name	Value	Range
Outer footprint	290 mm	200 – 400
Wall thickness	10 mm	3 – 20
Floor thickness	10 mm	3 – 20
Internal cavity height	120 mm	60 – 300
Vertical corner radius	12 mm	0 – 40
Cable gland hole diameter	16 mm	4 – 40
Cable hole centre height	60 mm	10 – 200
Length X	78 mm	20 – 250
Depth Y	58 mm	20 – 250
Height Z	98 mm	20 – 250
Width X	57 mm	20 – 250
Depth Y	68 mm	20 – 250
Height Z	51 mm	10 – 200
Board size	35 mm	15 – 90
Board thickness	10 mm	4 – 40
Lens barrel diameter	16 mm	6 – 40
Lens barrel length	10 mm	2 – 40
Length X	130 mm	30 – 250
Depth Y	90 mm	30 – 250
Height Z	20 mm	5 – 120
Width X	160 mm	40 – 270
Depth Y	100 mm	40 – 270
Thickness	1.6 mm	1 – 5
Standoff height	30 mm	5 – 110

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS