Brackets and mounts
Electric Scooter Steel Frame (Deck, Head Tube, Dropouts, Battery Tray)
- Bounding box
- 700.0 × 192.0 × 132.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
Electric stand-up scooter steel frame, welded assembly, all dimensions in mm. Deck: two parallel rectangular steel tubes, 40 x 25 mm cross-section, 2 mm wall, 700 mm long, spaced 160 mm center to center, lying horizontal. Three cross-member tubes, 25 x 25 mm, 2 mm wall, 160 mm long between the deck tubes, at both ends and the middle. Head tube: vertical round tube, 44 mm outer diameter, 3 mm wall, 110 mm long, welded at the front end of the deck, tilted back 15 degrees from vertical, centered between the two deck tubes. Gusset: two triangular steel gusset plates, 4 mm thick, 90 mm legs, connecting the head tube to the front of each deck tube. Rear: two rear axle mounting plates, 6 mm thick, 90 x 60 mm, welded vertically at the rear end of each deck tube, each with an open slot 14 mm wide and 25 mm deep from the bottom edge. Battery bracket: 3 mm steel plate, 220 x 100 mm, with 30 mm high side walls on both long sides, welded between the deck tubes in the middle, with four 6 mm holes at the corners.
Parameters
| Name | Value | Range |
|---|---|---|
| Deck Rail Length | 700 mm | 300 – 1500 |
| Deck Rail Width | 25 mm | 10 – 80 |
| Deck Rail Height | 40 mm | 10 – 100 |
| Deck Rail Wall | 2 mm | 1 – 6 |
| Rail Spacing (c-c) | 160 mm | 60 – 400 |
| Cross Member Section | 25 mm | 10 – 60 |
| Cross Member Wall | 2 mm | 1 – 5 |
| Cross Member Length | 160 mm | 40 – 400 |
| End Cross Member Inset | 40 mm | 15 – 150 |
| Head Tube OD | 44 mm | 20 – 80 |
| Head Tube Wall | 3 mm | 1 – 8 |
| Head Tube Length | 110 mm | 40 – 250 |
| Head Tube Tilt (from vertical) | 15 deg | 0 – 45 |
| Head Tube Position (X) | 40 mm | 5 – 200 |
| Head Tube Base Height | 20 mm | 0 – 60 |
| Gusset Thickness | 4 mm | 2 – 12 |
| Gusset Leg Length | 90 mm | 30 – 200 |
| Gusset Top Plate Height | 38 mm | 10 – 90 |
| Axle Plate Length | 90 mm | 40 – 200 |
| Axle Plate Height | 60 mm | 30 – 150 |
| Axle Plate Thickness | 6 mm | 2 – 15 |
| Axle Slot Width | 14 mm | 5 – 40 |
| Axle Slot Depth | 25 mm | 5 – 60 |
| Battery Tray Length | 220 mm | 60 – 500 |
| Battery Tray Width | 100 mm | 40 – 200 |
| Tray Plate / Wall Thickness | 3 mm | 1 – 8 |
| Tray Side Wall Height | 30 mm | 5 – 120 |
| Corner Hole Diameter | 6 mm | 2 – 20 |
| Corner Hole Inset | 15 mm | 5 – 60 |
| Tray Floor Height | 4 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu