Electric Scooter Chassis

1 views

Bounding box: 467 × 150 × 112.9 mm
Engine: 3D Printing B-rep
Parameters: 22
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

create 2 wheeler chassis for electrical scooter

Parameters

Name	Value	Range
Deck length	380 mm	200 – 600
Deck width	150 mm	80 – 250
Deck thickness	24 mm	12 – 60
Deck corner radius	22 mm	2 – 50
Bed edge chamfer	1.6 mm	0 – 4
Battery bay length	200 mm	60 – 400
Battery bay width	90 mm	40 – 150
Cavity depth under lid seat	9 mm	3 – 40
Lid plate thickness	4 mm	2 – 10
Lid lip engagement depth	6 mm	2 – 20
Lid lip frame width	8 mm	3 – 30
Head tube outer diameter	36 mm	16 – 70
Head tube bore diameter	26 mm	8 – 60
Head tube length	95 mm	30 – 200
Steering rake angle	18 deg	0 – 40
Head tube centre from nose	55 mm	10 – 120
Fork arm length beyond deck	85 mm	30 – 200
Clear width between fork arms	64 mm	30 – 160
Fork arm thickness across	14 mm	6 – 40
Fork arm height	18 mm	8 – 50
Rear axle hole diameter	12 mm	4 – 30
Sliding fit clearance	0.25 mm	0.1 – 0.6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS