Gears and transmission
Electric Rescue Vehicle Assembly
- Bounding box
- 3180.0 × 2070.0 × 1610.0 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
y curved roof with a small roof rack for gear. Doors: One side door for entry plus a rear double-door that opens to show bench seating or rescue gear. Front view details Ask the designer to show: A wide LED light bar above the windshield. Two round auxiliary spotlights on the front corners. A compact front winch integrated into the lower hull. Minimal bumper, almost flush with the hull to keep approach angle high. Small, high-mounted mirrors and simple handrails. No exhaust pipe anywhere (to make it clearly electric).
Parameters
| Name | Value | Range |
|---|---|---|
| Hull Length | 4200 mm | 3000 – 6000 |
| Hull Width | 1900 mm | 1500 – 2500 |
| Hull Total Height | 1800 mm | 1200 – 2500 |
| Hull Side Vertical Height | 1200 mm | 800 – 1800 |
| Wheel Diameter | 700 mm | 500 – 900 |
| Wheel Arch Width (X) | 250 mm | 150 – 350 |
| Wheel Arch Depth (into body) | 80 mm | 30 – 150 |
| Front Wheel X Position | -1200 mm | -1500 – -500 |
| Rear Wheel X Position | 1200 mm | 500 – 1500 |
| Side Door X Start | -600 mm | -1000 – 0 |
| Side Door X End | 600 mm | 0 – 1000 |
| Side Door Z Start | 200 mm | 100 – 500 |
| Side Door Z End | 1400 mm | 1000 – 1800 |
| Rear Cavity Depth (X) | 1200 mm | 500 – 2000 |
| Rear Cavity Half Width | 800 mm | 500 – 1000 |
| Rear Cavity Z Start | 100 mm | 0 – 300 |
| Rear Cavity Z End | 1750 mm | 1500 – 1950 |
| Rear Door Y Start | -600 mm | -900 – 0 |
| Rear Door Y End | 600 mm | 0 – 900 |
| Rear Door Z Start | 200 mm | 100 – 500 |
| Rear Door Z End | 1700 mm | 1300 – 1900 |
| Roof Rack Length | 1800 mm | 1000 – 3000 |
| Roof Rack Width | 1400 mm | 500 – 2000 |
| Roof Rack Height | 120 mm | 50 – 200 |
| Light Bar Length | 1200 mm | 500 – 2000 |
| Light Bar Width | 80 mm | 50 – 150 |
| Light Bar Height | 40 mm | 20 – 80 |
| Light Bar Z (center) | 1650 mm | 1500 – 1900 |
| Spotlight Diameter | 180 mm | 100 – 300 |
| Spotlight Depth | 120 mm | 50 – 200 |
| Spotlight Z (center) | 400 mm | 200 – 800 |
| Spotlight Y Offset (from center) | 200 mm | 100 – 400 |
| Winch Width (Y) | 300 mm | 200 – 500 |
| Winch Height (Z) | 180 mm | 100 – 300 |
| Winch Depth (X) | 250 mm | 100 – 400 |
| Winch Z (center) | 300 mm | 100 – 600 |
| Mirror Width (Y) | 150 mm | 100 – 200 |
| Mirror Height (Z) | 100 mm | 80 – 150 |
| Mirror Thickness (X) | 20 mm | 10 – 30 |
| Mirror X Position | 2000 mm | 1700 – 2100 |
| Mirror Z (center) | 1500 mm | 1200 – 1800 |
| Handrail Length | 600 mm | 300 – 1000 |
| Handrail Diameter | 30 mm | 15 – 50 |
| Handrail Z (center) | 800 mm | 500 – 1200 |
| Handrail Y Offset (from body) | 20 mm | 10 – 50 |
| Bench Length (Y) | 1600 mm | 1000 – 1900 |
| Bench Depth (X) | 500 mm | 400 – 800 |
| Bench Height (Z) | 600 mm | 400 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a