Brackets and mounts
Electraton Steel Space-Frame Chassis
- Bounding box
- 2414.2 × 900.0 × 363.7 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
build this model with this especifications: A steel space-frame chassis for a single-seater Electraton electric racing car, designed according to competition safety rules: - Overall Dimensions: Length 2400 mm, Width 1300 mm, Height 1000 mm, Wheelbase 1300 mm. - Main Frame Tubing: Round steel tubing, outer diameter 25.4 mm (1 inch), wall thickness 1.5 mm. - Key Structural Elements: 1. Main Roll Bar: Continuous U-shaped tubular loop behind the driver seat, height 1000 mm, angled backward at 5 degrees. 2. Front Roll Bar / Dash Hoop: Tubular loop in front of the cockpit above the steering wheel area. 3. Side Impact Structure: Triangulated side protection bars running along both sides of the cockpit between 350 mm and 530 mm above ground level. 4. Front Impact Attenuator Support: Front nose section extending 200 mm forward from the front axle line. 5. Front Anti-Intrusion Plate: Flat rectangular plate mounted at the front nose. 6. Floor Pan Plate: Flat aluminum panel attached to the bottom frame rails beneath the cockpit area. 7. Engine / Battery Bay: Rear frame section behind the firewall for battery packs and electric motor mounting. - Features: Fully triangulated tubular lattice layout, symmetrical along the longitudinal center line, smooth weld joints at tube intersections.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 2400 mm | 1500 – 3500 |
| Overall Width | 1300 mm | 800 – 1800 |
| Overall Height | 1000 mm | 700 – 1400 |
| Wheelbase | 1300 mm | 900 – 2200 |
| Tube Outer Diameter | 25.4 mm | 15 – 45 |
| Tube Wall Thickness | 1.5 mm | 1 – 4 |
| Main Roll Bar Rake | 5 deg | 0 – 20 |
| Front Dash Hoop Height | 800 mm | 400 – 1200 |
| Side Impact Bar (Lower) | 350 mm | 150 – 600 |
| Side Impact Bar (Upper) | 530 mm | 300 – 900 |
| Rear Battery Bay Height | 600 mm | 300 – 900 |
| Front Nose Extension | 200 mm | 50 – 500 |
| Anti-Intrusion Plate Width | 300 mm | 100 – 600 |
| Anti-Intrusion Plate Height | 200 mm | 80 – 500 |
| Anti-Intrusion Plate Thickness | 3 mm | 1 – 10 |
| Floor Pan Length | 900 mm | 300 – 1600 |
| Floor Pan Width | 500 mm | 200 – 1100 |
| Floor Pan Thickness | 2 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu