Everything else
EcoInnova Greenhouse Assembly (Simplified Solid)
- Bounding box
- 1000.0 × 600.1 × 921.5 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
Diseña un modelo 3D del proyecto **EcoInnova**, un invernadero automatizado. Incluye estructura con plantas, tanque de agua, tuberías, 2 bombas, ventilador y válvula. En el tablero eléctrico coloca: PLC Siemens S7-300 con su fuente, Arduino Mega 2560, módulo Ethernet ENC28J60, ESP32 DevKit V1, protoboard y módulo de 4 relés. Incluye una laptop para programar el PLC. **Conexiones Arduino Mega:** - ENC28J60: MISO D50, MOSI D51, SCK D52, CS D53. - Sensor ultrasónico HC-SR04: TRIG D7, ECHO D6. - DHT11: DATA D8. - Sensor de humedad del suelo: A0. - Relés: bomba de llenado D22, bomba de riego D23, ventilador D24 y válvula D25. - Comunicación Mega–ESP32: Mega TX1 D18 hacia ESP32 RX GPIO16, y ESP32 TX GPIO17 hacia Mega RX1 D19, usando adaptación de nivel de voltaje. Dibuja los cables ordenados, identifica los pines y usa colores distintos para alimentación, tierra, sensores, comunicación y relés. Muestra una vista general y acercamientos del tablero eléctrico. Usa un estilo industrial limpio y etiquetas legibles. No inventes conexiones ni voltajes; si falta información, indícala.
Parameters
| Name | Value | Range |
|---|---|---|
| Greenhouse Length | 1000 mm | 500 – 2000 |
| Greenhouse Width | 600 mm | 300 – 1200 |
| Greenhouse Height | 800 mm | 400 – 1600 |
| Post Size (square cross-section) | 20 mm | 10 – 50 |
| Wall/Floor Thickness | 3 mm | 1 – 8 |
| Water Tank Diameter | 300 mm | 150 – 500 |
| Water Tank Height | 400 mm | 200 – 800 |
| Pipe Diameter | 20 mm | 10 – 50 |
| Pipe Length (each segment) | 150 mm | 50 – 300 |
| Pump Length (X) | 80 mm | 50 – 150 |
| Pump Width (Y) | 50 mm | 30 – 100 |
| Pump Height (Z) | 50 mm | 30 – 100 |
| Fan Diameter | 150 mm | 80 – 300 |
| Fan Thickness | 60 mm | 30 – 120 |
| Valve Length (X) | 60 mm | 40 – 120 |
| Valve Width (Y) | 40 mm | 30 – 80 |
| Valve Height (Z) | 40 mm | 30 – 80 |
| Panel Enclosure Thickness (X) | 5 mm | 2 – 10 |
| Panel Width (Y) | 200 mm | 150 – 400 |
| Panel Height (Z) | 300 mm | 200 – 500 |
| Component Protrusion Depth (X) | 30 mm | 10 – 60 |
| PLC Width (Y) | 80 mm | 50 – 120 |
| PLC Height (Z) | 40 mm | 30 – 80 |
| Arduino Mega Width (Y) | 100 mm | 60 – 150 |
| Arduino Mega Height (Z) | 60 mm | 40 – 100 |
| ENC28J60 Width (Y) | 50 mm | 30 – 80 |
| ENC28J60 Height (Z) | 30 mm | 20 – 60 |
| ESP32 Width (Y) | 50 mm | 30 – 80 |
| ESP32 Height (Z) | 30 mm | 20 – 60 |
| Protoboard Width (Y) | 80 mm | 50 – 120 |
| Protoboard Height (Z) | 60 mm | 40 – 100 |
| Relay Module Width (Y) | 70 mm | 50 – 100 |
| Relay Module Height (Z) | 50 mm | 30 – 80 |
| Laptop Base Length (X) | 120 mm | 80 – 200 |
| Laptop Base Width (Y) | 80 mm | 60 – 150 |
| Laptop Base Thickness (Z) | 10 mm | 5 – 20 |
| Laptop Screen Length (X) | 120 mm | 80 – 200 |
| Laptop Screen Width (Y) | 80 mm | 60 – 150 |
| Laptop Screen Thickness (Z) | 5 mm | 2 – 10 |
| Laptop Screen Angle (deg) | 110 deg | 90 – 135 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm