Brackets and mounts
Echo Pop Outlet Wall Mount
- Bounding box
- 111.2 × 59 × 215.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable minimalist wall-outlet mount specifically designed for the Amazon Echo Pop [image_0.png], integrated directly onto a standard US outlet plug adapter to eliminate hanging wires. The entire piece must be a single, cohesive, and robust 3D-printed structure. Create a 3D-printable minimalist wall-outlet mount specifically designed for the Amazon Echo Pop [image_0.png], integrated directly onto a standard US outlet plug adapter to eliminate hanging wires. The entire piece must be a single, cohesive, and robust 3D-printed structure. Lower Plug Housing & Plug Core: Directly beneath the cradle is an integrated, compact vertical sleeve or backplate. It must feature a rear socket specifically sized to tightly house the standard Amazon Echo Pop power adapter (approx. 41 mm x 41 mm with a depth of 50 mm, or designed for the standard US 2-prong plug to pass through to the wall). Ensure the plug prongs remain exposed at the back to secure the entire unit to the wall outlet. Cable Management & Access: There must be a rear circular wire passthrough hole (approx. 12 mm diameter) at the back of the upper cradle to route the power cable downward. At the bottom, include an integrated, low-profile cable spool/wrap or hidden rear cavity to tightly coil and tuck the excess USB-C power cord, keeping it completely invisible and flush. Usability: The back flat plate of the mount must press flush against a standard US vertical wall plate, utilizing only the top outlet and leaving the bottom outlet entirely open and unobstructed for other appliances. Structural Integrity: Include subtle, curved support brackets/ribs underneath the cradle connecting to the backplate for high structural strength. Use rounded, smooth edges (fillets of 2–3 mm) throughout the design to ensure a clean, modern aesthetic
Parameters
| Name | Value | Range |
|---|---|---|
| Echo Pop body diameter | 100 mm | 80 – 120 |
| Sliding clearance per side | 0.6 mm | 0.2 – 1.5 |
| Cradle wall thickness | 5 mm | 3 – 10 |
| Cradle depth from wall | 55 mm | 30 – 80 |
| Cradle centre height | 160 mm | 110 – 240 |
| Backplate width | 84 mm | 50 – 120 |
| Backplate height | 212 mm | 140 – 280 |
| Backplate thickness | 5 mm | 3 – 10 |
| Housing width | 60 mm | 46 – 80 |
| Housing height | 100 mm | 56 – 140 |
| Housing depth | 54 mm | 40 – 80 |
| Adapter width | 42 mm | 30 – 62 |
| Adapter height | 42 mm | 30 – 62 |
| Adapter centre height | 30 mm | 20 – 60 |
| Cable passthrough diameter | 12 mm | 6 – 20 |
| Cable hole distance from wall | 20 mm | 8 – 36 |
| Support rib thickness | 6 mm | 3 – 12 |
| Edge rounding radius | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
