Gears and transmission
E-Waste to Art Kit Assembly
- Bounding box
- 300.0 × 200.0 × 153.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
A cardboard box written e-waste to art kit on top and including materials broken electrical appliances like switch wires and non toxic glue safe scissors and gloves and a manual and safety gears
Parameters
| Name | Value | Range |
|---|---|---|
| Box length | 300 mm | 200 – 500 |
| Box width | 200 mm | 150 – 400 |
| Box height | 150 mm | 100 – 300 |
| Cardboard thickness | 3 mm | 1 – 8 |
| Lid thickness | 3 mm | 1 – 8 |
| Appliance 1 length | 80 mm | 40 – 150 |
| Appliance 1 width | 60 mm | 30 – 120 |
| Appliance 1 height | 40 mm | 20 – 100 |
| Motor diameter | 30 mm | 10 – 60 |
| Motor length | 60 mm | 20 – 120 |
| Circuit board length | 100 mm | 40 – 180 |
| Circuit board width | 60 mm | 30 – 120 |
| Circuit board thickness | 3 mm | 1 – 10 |
| Wire bundle length | 200 mm | 100 – 280 |
| Wire diameter | 4 mm | 1 – 10 |
| Switch length | 20 mm | 8 – 50 |
| Switch width | 12 mm | 5 – 30 |
| Switch height | 18 mm | 8 – 50 |
| Glue bottle diameter | 50 mm | 20 – 80 |
| Glue bottle height | 120 mm | 50 – 200 |
| Glue cap diameter | 20 mm | 8 – 40 |
| Glue cap height | 15 mm | 5 – 40 |
| Scissors length | 150 mm | 80 – 250 |
| Scissors width | 60 mm | 30 – 120 |
| Scissors thickness | 4 mm | 1 – 10 |
| Glove length | 200 mm | 100 – 300 |
| Glove width | 100 mm | 50 – 200 |
| Glove thickness | 5 mm | 1 – 15 |
| Manual length | 210 mm | 100 – 300 |
| Manual width | 148 mm | 80 – 250 |
| Manual thickness | 5 mm | 1 – 20 |
| Goggles width | 150 mm | 80 – 250 |
| Goggles height | 50 mm | 20 – 100 |
| Goggles depth | 50 mm | 20 – 100 |
| Goggles lens depth | 8 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled