Everything else
Dutch Windmill Wind Generator
- Bounding box
- 362.6 × 420.0 × 515.7 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Dutch windmill wind generator changed to a single 1 W LED lantern (on the side away from the motor) and a snug pocket for a Pololu U1V10F3 3.3 V step-up board plus a cradle for a 10 mm input capacitor.
Parameters
| Name | Value | Range |
|---|---|---|
| Tower height | 240 mm | 180 – 250 |
| Tower width across flats at the bottom | 150 mm | 120 – 170 |
| Tower width across flats at the top | 80 mm | 75 – 95 |
| Wall thickness | 2.4 mm | 1.6 – 3.2 |
| Sail tip radius | 210 mm | 150 – 220 |
| Sail pitch angle (higher starts easier, lower spins faster) | 18 deg | 8 – 30 |
| Windshaft tilt (nose up) | 7 deg | 4 – 10 |
| Gear module | 1 mm | 0.8 – 1.25 |
| Brake wheel teeth | 48 | 36 – 60 |
| Motor pinion teeth | 12 | 10 – 16 |
| Gear face width | 6 mm | 4 – 8 |
| Pinion rotation for meshing in the model | 0 deg | 0 – 30 |
| 608 bearing seat clearance (diametral) | 0.15 mm | 0.05 – 0.3 |
| Pinion bore clearance on the 2 mm motor shaft | 0.05 mm | 0 – 0.2 |
| Motor body diameter | 24 mm | 20 – 28 |
| Motor body length | 12.5 mm | 10 – 20 |
| TPU motor sleeve wall thickness | 1 mm | 0.6 – 2 |
| LED lens hole diameter | 6.5 mm | 3 – 9 |
| LED body seat diameter (8 mm body) | 8.4 mm | 5 – 14 |
| LED solder tab slot length (15 mm across tabs) | 15.6 mm | 10 – 20 |
| LED body seat depth | 2.5 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm