Ducted Single-Rotor UAV Body with Servo Shutters

1 views

Bounding box: 158.4 × 158.4 × 50.6 mm
Engine: Precision B-rep
Parameters: 24
Published: October 8, 2026

Download

Free to download and use. See the terms.

The prompt

корпус дрона с одним винтом. 4 воздушных канала перекрываются заслонками с сервоприводами. Компенсация бокового вращения достигается за счёт смещения воздушных каналов.

Parameters

Name	Value	Range
Duct Outer Diameter	120 mm	60 – 300
Duct Wall Thickness	3 mm	1.5 – 8
Duct Height	30 mm	10 – 80
Pylon Diameter	30 mm	12 – 80
Pylon Height	38 mm	10 – 120
Motor Shaft Bore	8 mm	2 – 30
Vane / Channel Count	4 pcs	2 – 8
Vane Chord (width)	12 mm	3 – 40
Vane Height	26 mm	5 – 100
Channel Offset (yaw trim)	6 deg	0 – 15
Shutter Plate Thickness	2 mm	1 – 6
Shutter Opening Angle	25 deg	0 – 70
Hinge Shaft Diameter	4 mm	1.5 – 10
Servo Body Length	22 mm	8 – 45
Servo Body Width	12 mm	5 – 30
Servo Body Height	21 mm	5 – 45
Servo Mount Overlap	3 mm	1 – 12
Rotor Diameter	100 mm	30 – 260
Rotor Blade Count	2 pcs	2 – 6
Blade Chord	18 mm	5 – 60
Blade Thickness	3 mm	1 – 10
Blade Pitch Angle	15 deg	0 – 45
Rotor Hub Diameter	20 mm	8 – 60
Rotor Hub Height	6 mm	2 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS