Dual-Side DSLR Handheld Grip Assembly

Create a simple, strong, 3D-printable dual-side handheld camera grip for a Canon EOS 600D DSLR. Camera reference: - Canon EOS 600D body dimensions: 133.1 mm wide, 99.5 mm high, 79.7 mm deep. - Body-only weight: approximately 515 g. - The camera has one standard 1/4-20 tripod socket on the bottom. - The battery door is on the underside of the camera and must remain fully accessible. - Do not block the battery door, memory card access, screen movement, lens mount, or camera controls. Design: - Make one wide horizontal base plate under the camera. - Base plate dimensions: approximately 180 mm wide, 85 mm deep and 12 mm thick. - Add one vertical ergonomic handle on the left side and one identical vertical ergonomic handle on the right side. - Handles should be symmetrical. - Each handle should be approximately 100 mm tall, 30 mm wide and 28 mm deep. - The distance between the inside edges of the handles should be approximately 135 mm. - The camera should sit centered between the handles. - Add rounded edges with a radius of 5–8 mm. - Add large triangular reinforcement gussets between each handle and the base plate. - Make the handles comfortable for two-handed handheld video recording. - The handles should extend downward from the base plate, not upward around the camera. Camera attachment: - Use one standard 1/4-20 UNC camera screw in the center area of the base plate. - Add a circular metal washer recess around the camera screw. - Add a long adjustment slot around the camera screw so the camera position can be moved front-to-back by approximately 20 mm. - The screw must not be made only from plastic. - Design the hole for a real metal 1/4-20 camera screw and a metal washer or threaded insert. - Keep the bottom of the camera clear around the battery door. - Add a 3 mm soft rubber or TPU pad between the camera and the base plate. - Do not create a cage, 15 mm rod system, matte box, lens holder, shoulder rig, or extra accessories. 3D printing: - Design the part for FDM printing in PETG. - Use thick walls and strong solid areas around the camera screw. - Minimum wall thickness: 4 mm. - Minimum thickness around the tripod screw slot: 8 mm. - Add fillets and gussets instead of sharp 90-degree corners. - Split the design into separate printable parts if the complete width is too large. - The final design must be exportable as STL. - Also provide a dimensioned STEP or editable CAD file if possible. Safety: - The camera must be supported by the mechanical base plate, metal screw and washer, not by plastic threads alone. - The design must not rely on the camera strap lugs. - Include a warning that the printed part must be tested with a light load before carrying the camera.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.