Loading the interactive model…
Interactive 3D model of Dual Rebreather Scrubber AssemblyEverything else
Dual Rebreather Scrubber Assembly
27 views
- Bounding box
- 310.0 × 297.0 × 147.5 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
dual rebreather scrubber, with 250 cc MOF , and a 6 liter volume, for a personal firemen rebreather
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Width | 300 mm | 200 – 400 |
| Housing Depth | 220 mm | 200 – 300 |
| Housing Height | 100 mm | 80 – 150 |
| Wall Thickness | 3 mm | 1 – 10 |
| Front Cartridge Inset | 10 mm | 5 – 20 |
| Cartridge Diameter | 80 mm | 50 – 150 |
| Cartridge Length | 180 mm | 100 – 250 |
| Cartridge Wall Thickness | 2 mm | 1 – 5 |
| End Cap Thickness | 2 mm | 1 – 5 |
| Cartridge Center Spacing | 200 mm | 100 – 280 |
| Sorbent Plug Length (MOF) | 25 mm | 10 – 100 |
| Mesh Hole Diameter | 2 mm | 1 – 10 |
| Mesh Row Count | 6 mm | 2 – 12 |
| Mesh Column Count | 8 mm | 4 – 24 |
| Manifold Port Diameter | 40 mm | 10 – 60 |
| Socket Engagement Depth | 5 mm | 2 – 15 |
| Inlet Top Protrusion | 15 mm | 5 – 30 |
| Outlet Rear Protrusion | 15 mm | 5 – 30 |
| Cover Thickness | 10 mm | 5 – 20 |
| O‑Ring Groove Width | 3 mm | 1 – 6 |
| O‑Ring Groove Depth | 2 mm | 1 – 4 |
| O‑Ring Offset from Edge | 5 mm | 2 – 10 |
| Clamp Radius | 4 mm | 2 – 8 |
| Clamp Length | 10 mm | 5 – 20 |
| Harness Length (X) | 150 mm | 100 – 250 |
| Harness Width (Z) | 80 mm | 60 – 100 |
| Harness Thickness (Y) | 5 mm | 2 – 10 |
| Slot Length | 30 mm | 10 – 50 |
| Slot Width | 10 mm | 5 – 20 |
| Slot X Offset | 40 mm | 10 – 80 |
| Slot Z Offset | 20 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS