Everything else
DS3218 Servo Pivot Bracket
- Bounding box
- 172.0 × 60.0 × 70.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
on the first part make a cutout for the 40 × 20 × 40.5 mm DS3218 motor
Parameters
| Name | Value | Range |
|---|---|---|
| Square tube size | 25 mm | 10 – 60 |
| Tube socket depth | 20 mm | 5 – 60 |
| Pivot / axle bore dia | 8 mm | 3 – 20 |
| Drive drum dia | 50 mm | 20 – 120 |
| Drive drum width | 24 mm | 4 – 60 |
| Belt groove width | 6 mm | 0 – 20 |
| Belt groove depth | 2 mm | 0 – 10 |
| Rotating clearance | 0.5 mm | 0.1 – 3 |
| Base length (X) | 100 mm | 40 – 200 |
| Base width (Y) | 60 mm | 30 – 150 |
| Base height (Z) | 30 mm | 10 – 80 |
| Body fillet radius | 3 mm | 0 – 10 |
| Yoke plate length | 40 mm | 10 – 120 |
| Yoke plate thickness | 6 mm | 2 – 20 |
| Yoke gap (inner) | 30 mm | 10 – 80 |
| Yoke plate height | 40 mm | 10 – 120 |
| Output tower width | 25 mm | 10 – 100 |
| Output tower height | 45 mm | 10 – 150 |
| Base bolt hole dia | 4.5 mm | 1.5 – 12 |
| Cross hole dia | 4.5 mm | 1.5 – 12 |
| Cross hole spacing | 20 mm | 5 – 60 |
| Base cross hole Z | 8 mm | 1 – 60 |
| Output cross hole offset | 10 mm | 1 – 60 |
| Servo ear screw dia | 3.2 mm | 1 – 8 |
| Servo ear hole spacing | 30 mm | 5 – 60 |
| Servo tab thickness | 5 mm | 2 – 20 |
| Servo tab width (Y) | 40 mm | 10 – 80 |
| Servo tab height | 16 mm | 5 – 60 |
| Servo flange plane Z | 14 mm | 0 – 80 |
| DS3218 body length | 40 mm | 20 – 60 |
| DS3218 body width | 20 mm | 10 – 40 |
| DS3218 body height | 40.5 mm | 20 – 60 |
| Min wall to tube socket | 3 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm