Brackets and mounts
DS Lite Lower Half Mounting Bracket
- Bounding box
- 160.0 × 100.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing parametric model. Do not create a new model. Keep unchanged: - Base plate (160 × 100 × 6 mm) - Four 5 mm mounting holes - Side guide rails - Overall layout The holder is for the LOWER HALF of an OPEN Nintendo DS Lite. Console dimensions: 133.0 mm × 73.9 mm × 21.5 mm Use 0.5 mm clearance around the console. The console is inserted from above. Replace the continuous rear wall. Create only TWO rear support tabs. Each rear support tab: - 15 mm wide - 8 mm high - 3 mm thick Position one rear support tab behind each side rail. Leave the entire center of the rear edge open. The opening between the rear support tabs must be at least 100 mm wide. Do not create any material behind the center of the console. The hinge area must remain completely open. Add two mirrored flexible snap-fit clips. Place one snap-fit clip on each side rail near the front. The clips should flex outward during insertion and securely retain the lower shell of the console while allowing removal by hand. Use rounded lead-in chamfers on both clips. Support the console only at: - two side guide rails - two rear support tabs - two snap-fit clips Leave completely unobstructed: - front edge - rear hinge area - charging port - headphone jack - stylus slot - power switch - volume slider Generate one clean parametric solid body. Optimize for FDM printing. Avoid unsupported overhangs. No supports required. No logos. No text. No decorative features.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate length | 160 mm | 140 – 200 |
| Base plate width | 100 mm | 80 – 120 |
| Base plate thickness | 6 mm | 4 – 10 |
| Corner fillet radius | 3 mm | 0.5 – 5 |
| Hole margin from edge | 7 mm | 4 – 12 |
| Hole diameter | 5 mm | 3 – 8 |
| Rail height | 8 mm | 4 – 15 |
| Rail thickness | 3 mm | 1.5 – 5 |
| Console width | 73.9 mm | 60 – 90 |
| Clearance each side | 0.5 mm | 0.2 – 1.5 |
| Rear tab width (Y) | 15 mm | 10 – 25 |
| Rear tab thickness (X) | 3 mm | 2 – 5 |
| Rear tab height (Z) | 8 mm | 4 – 12 |
| Opening between tabs (Y) | 70 mm | 50 – 90 |
| Clip length (X) | 8 mm | 4 – 15 |
| Clip protrusion (Y inward) | 1.5 mm | 0.5 – 3 |
| Clip lead-in chamfer radius | 0.8 mm | 0.2 – 1.5 |
| Clip offset from front edge | 5 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu