Brackets and mounts
Drying Lid Assembly
- Bounding box
- 466.0 × 333.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
The Drying Lid Assembly is a specialized environmental enclosure designed to maintain controlled humidity and thermal conditions during the tape casting process. Constructed from durable 6061-T6 aluminum, it features a gasket-sealed hinged design, integrated IR lamp mounting, and dedicated gas purge ports to ensure uniform solvent evaporation. External Dimensions: 450mm x 320mm x 120mm Internal Dimensions: 438mm x 308mm x 110mm Wall Thickness: 6mm Material: 6061-T6 Aluminum, Anodized Weight: 4.2 kg Mounting Configuration: Rear-hinged with dual side pneumatic support struts Gasket Type: High-temperature silicone bulb seal Purge Ports: Dual 1/4 inch NPT fittings for N2 or dry air input/exhaust Mounting Cutouts: Center-top 80mm circular aperture for IR lamp assembly
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 450 mm | 300 – 800 |
| Outer Width | 320 mm | 200 – 600 |
| Outer Height | 120 mm | 80 – 200 |
| Side Wall Thickness | 6 mm | 3 – 12 |
| Top Wall Thickness | 10 mm | 4 – 20 |
| Top IR Aperture Diameter | 80 mm | 20 – 120 |
| Purge Port Hole Diameter | 11.1 mm | 6 – 16 |
| Purge Port Height From Bottom | 60 mm | 20 – 100 |
| Gasket Groove Width | 3 mm | 1 – 5 |
| Gasket Groove Depth | 2.5 mm | 1 – 5 |
| Hinge Lug Count | 3 mm | 1 – 5 |
| Hinge Lug Radius | 8 mm | 4 – 12 |
| Hinge Lug Length | 30 mm | 20 – 60 |
| Hinge Pin Hole Radius | 5 mm | 2 – 8 |
| Side Strut Tab Thickness | 8 mm | 4 – 12 |
| Side Strut Tab Width | 20 mm | 12 – 40 |
| Side Strut Tab Height | 30 mm | 12 – 50 |
| Side Strut Mount Hole Diameter | 8 mm | 4 – 12 |
| Side Strut Y Position | -80 mm | -150 – 0 |
| Side Strut Z Position | 60 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent