Everything else
Dryckhållare för Biltema verktygstavla
- Bounding box
- 114 × 78.5 × 50 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Dryckhållare som skruvas fast i en Biltema verktygstavla med 4 mm hål (c/c 12 mm)
Parameters
| Name | Value | Range |
|---|---|---|
| Innerdiameter, plats för burk/flaska | 70 mm | 50 – 100 |
| Höjd på hållaren | 50 mm | 25 – 120 |
| Väggtjocklek | 2.5 mm | 1.6 – 5 |
| Bottentjocklek | 3 mm | 2 – 6 |
| Dräneringshål i botten | 8 mm | 0 – 20 |
| Plåttjocklek | 4 mm | 3 – 8 |
| Avstånd mellan hålkolumner (mm, multipel av 12) | 96 mm | 24 – 144 |
| Avstånd mellan hålrader (mm, multipel av 12) | 24 mm | 12 – 48 |
| Skruvhål i plattan | 4.5 mm | 3.5 – 6 |
| Kant utanför yttersta hålet | 9 mm | 6 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm