Gears and transmission
Drive Shaft with Mounted V-Belt Pulley
- Bounding box
- 400.0 × 80.2 × 80.2 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
pulley rigidly mounted on drive shaft in assembly format
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Diameter | 20 mm | 5 – 100 |
| Shaft Length | 200 mm | 50 – 500 |
| Pulley Outer Diameter | 80 mm | 30 – 300 |
| Pulley Bore Diameter (nominal) | 20 mm | 8 – 80 |
| Pulley Width | 30 mm | 10 – 100 |
| Groove Root Diameter | 60 mm | 20 – 299 |
| Groove Top Half-Width | 8 mm | 1 – 25 |
| Groove Bottom Half-Width | 4 mm | 1 – 20 |
| Pulley Clearance From Left End | 10 mm | 0 – 100 |
| Press-Fit Interference (diametral) | 0.05 mm | 0.02 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled