Everything else
Door Intercom Rain Visor
- Bounding box
- 33 × 33 × 52 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Это козырек. Задняя стенка сплошная. 1 вид сбоку, 2 вид спереди, 3 сверху. Размеры домофона, что к этому козырьки. 2.5 см длина от стенки до края его, 10 см ширина +- несколько мм, 15.3 примерно 3 мм +- высота. Отступ от ширины 1-1.5 см сверху так же. Примерно такая была одобрена, но ее нужно усовершенствовать
Parameters
| Name | Value | Range |
|---|---|---|
| Intercom width | 100 mm | 40 – 250 |
| Intercom depth from the wall | 25 mm | 5 – 80 |
| Projection past the intercom front | 8 mm | 0 – 40 |
| Top edge inset from intercom side, per side | 5 mm | 0 – 25 |
| Front edge extra width per side | 2 mm | 0 – 20 |
| Height of the wall plate | 52 mm | 25 – 120 |
| Roof fall from wall to front | 14 mm | 2 – 40 |
| Height of the front drip lip | 8 mm | 2 – 30 |
| Side wing drop at the wall | 30 mm | 0 – 60 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Wall plug hole diameter | 4.5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm