Dome Display Speaker

1 views

Bounding box: 66 × 66 × 55.5 mm
Engine: 3D Printing B-rep
Parameters: 19
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

请以50毫米直径的半球形实心玻璃盖在屏幕前，还有这个37毫米直径,厚度10毫米的这个圆形屏幕，还有这个喇叭8毫米厚长度30毫米以及对应这个电池电池的这个尺寸是8毫米的厚,宽的话是33毫米，参考我发给你的参考图,帮我设计出一个产品出来，

Parameters

Name	Value	Range
Glass dome diameter	50 mm	30 – 90
Display diameter	37 mm	20 – 60
Display thickness	10 mm	4 – 20
Speaker length	30 mm	15 – 50
Speaker width	15 mm	8 – 30
Speaker thickness	8 mm	3 – 15
Battery width	33 mm	15 – 50
Battery length	40 mm	20 – 60
Battery thickness	8 mm	3 – 15
Wall thickness	2.4 mm	1.2 – 5
Floor thickness	2.5 mm	1.2 – 6
Flat rim around the dome	8 mm	4 – 20
Screen shelf thickness	2 mm	1.2 – 5
Sliding clearance	0.25 mm	0.1 – 0.6
Bottom chamfer	1.5 mm	0.5 – 4
Speaker grille holes (0 = none)	20 mm	0 – 40
Grille hole diameter	2.2 mm	1 – 4
Charging port width	9 mm	4 – 16
Charging port height	3.5 mm	2 – 8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS