Everything else
DMX Lighting Console (Top Panel + Rear I/O)
- Bounding box
- 540.0 × 428.0 × 89.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
на изображении верхняя сторона, а на задней панели 2 xlr out dmx 512 . 1 xlr in audio. 1 xlr LTC . 1 powercon . 1 usb c. 2 ethernet
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis width | 540 mm | 300 – 900 |
| Chassis depth | 420 mm | 250 – 700 |
| Chassis height | 70 mm | 30 – 150 |
| Corner radius | 8 mm | 0 – 30 |
| Button columns | 9 pcs | 1 – 12 |
| Button rows | 8 pcs | 1 – 12 |
| Key pitch | 26 mm | 16 – 40 |
| Key size | 18 mm | 6 – 30 |
| Key height | 4 mm | 1 – 12 |
| Soft-key diameter | 12 mm | 4 – 24 |
| Soft-key height | 4 mm | 1 – 12 |
| Pad rows | 3 pcs | 1 – 6 |
| Pad size | 16 mm | 6 – 28 |
| Pad height | 3 mm | 1 – 10 |
| Bottom key size | 16 mm | 6 – 28 |
| Bottom key height | 3 mm | 1 – 10 |
| Fader count | 9 pcs | 1 – 12 |
| Fader slot width | 6 mm | 2 – 14 |
| Fader slot length | 56 mm | 20 – 140 |
| Fader cap width | 13 mm | 4 – 30 |
| Fader cap length | 22 mm | 8 – 60 |
| Fader cap height | 9 mm | 3 – 25 |
| Fader recess depth | 3 mm | 0.5 – 10 |
| Encoder count | 4 pcs | 1 – 8 |
| Encoder pitch | 92 mm | 40 – 160 |
| Encoder diameter | 60 mm | 20 – 120 |
| Encoder height | 20 mm | 5 – 50 |
| Small knob diameter | 22 mm | 8 – 60 |
| Small knob height | 12 mm | 3 – 40 |
| XLR count (2 DMX out / 1 audio in / 1 LTC) | 4 pcs | 1 – 8 |
| XLR body diameter | 26 mm | 14 – 40 |
| XLR recess diameter | 20 mm | 10 – 34 |
| powerCON count | 1 pcs | 1 – 4 |
| powerCON body diameter | 34 mm | 20 – 50 |
| powerCON recess diameter | 28 mm | 16 – 44 |
| USB-C count | 1 pcs | 1 – 3 |
| USB-C body width | 12 mm | 6 – 24 |
| USB-C body height | 8 mm | 4 – 16 |
| EtherCON / RJ45 count | 2 pcs | 1 – 6 |
| RJ45 body width | 18 mm | 10 – 30 |
| RJ45 body height | 15 mm | 8 – 26 |
| Connector protrusion | 8 mm | 2 – 25 |
| Connector recess depth | 5 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm