Everything else
DKS RC Brushless Motor Mount
- Bounding box
- 41 × 34 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Dks basic RC arabaya uygun fırçasız motor takma parçası
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate length | 36 mm | 20 – 80 |
| Base plate width | 34 mm | 18 – 60 |
| Base plate thickness | 4 mm | 2 – 8 |
| Chassis screw spacing | 18 mm | 8 – 40 |
| Chassis slot length | 12 mm | 4 – 30 |
| Chassis screw hole diameter | 3.4 mm | 2.5 – 6 |
| Motor plate width | 34 mm | 20 – 70 |
| Motor plate height | 34 mm | 20 – 80 |
| Motor plate thickness | 5 mm | 2.5 – 10 |
| Motor screw pitch in Y | 19 mm | 8 – 30 |
| Motor screw pitch in Z | 16 mm | 8 – 30 |
| Motor screw clearance M3=3.4 | 3.4 mm | 2.5 – 6 |
| Radial slot adjustment range | 6 mm | 0 – 14 |
| Shaft / boss clearance | 12 mm | 6 – 24 |
| Gusset leg length | 14 mm | 6 – 30 |
| Gusset thickness | 3 mm | 2 – 6 |
| Gusset Y offset from centre | 15 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm