Brackets and mounts
DIY Rotary Shaker - Enclosure + Rotating Top Plate
- Bounding box
- 380.0 × 200.0 × 250.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Generate 3D CAD models for the static structure of a "DIY Rotary Shaker". Units: millimeters (mm). Create 2 separate components. Apply a 2mm fillet to all sharp wooden edges for safety and aesthetics. --- COMPONENT 1: MAIN WOODEN ENCLOSURE --- Create a rectangular hollow wooden box. Outer dimensions: Width 200mm, Depth 200mm, Height 250mm. Wall thickness: 10mm. Bottom base plate thickness: 10mm. The top face is completely open. Inside the enclosure, on the left inner wall, create a vertical mounting plate (80mm x 80mm, thickness 5mm) positioned 20mm from the left wall and 50mm from the bottom. On the right outer wall, drill a 10mm diameter through-hole for a power jack, positioned 50mm from the bottom and centered on the depth. On the front face, cut a rectangular through-hole (15mm width x 30mm height) for an OLED display, positioned 50mm from the top edge and centered on the width. On the bottom base plate, add four 3mm diameter through-holes, positioned 15mm from each corner, for rubber feet. --- COMPONENT 2: ROTATING TOP PLATE --- Create a circular wooden plate. Diameter: 150mm. Thickness: 15mm. Add a central through-hole with a diameter of 8.2mm (tolerance for an M8 bolt). On the bottom face of this plate, create four shallow circular recesses: depth 2mm, diameter 20mm. Position these at a radius of 60mm from the center, at 0, 90, 180, and 270 degrees. On the top face of this plate, create a circular recess: diameter 80mm, depth 3mm, centered, to securely hold a cup.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width (X) | 200 mm | 100 – 400 |
| Enclosure Depth (Y) | 200 mm | 100 – 400 |
| Enclosure Height (Z) | 250 mm | 100 – 500 |
| Wall Thickness | 10 mm | 3 – 30 |
| Bottom Plate Thickness | 10 mm | 3 – 30 |
| Mount Plate Size (80 x 80) | 80 mm | 20 – 160 |
| Mount Plate Thickness | 5 mm | 2 – 20 |
| Mount Plate Gap from Left Wall | 20 mm | 0 – 150 |
| Mount Plate Height Above Base | 50 mm | 0 – 200 |
| Power Jack Hole Dia | 10 mm | 3 – 30 |
| Jack Hole Height Above Base | 50 mm | 10 – 200 |
| OLED Cut-out Width | 15 mm | 5 – 60 |
| OLED Cut-out Height | 30 mm | 5 – 60 |
| OLED Cut-out Below Top Edge | 50 mm | 5 – 200 |
| Rubber Foot Hole Dia | 3 mm | 1 – 12 |
| Foot Hole Corner Inset | 15 mm | 3 – 60 |
| Top Plate Diameter | 150 mm | 50 – 300 |
| Top Plate Thickness | 15 mm | 5 – 40 |
| Central M8 Bore Dia | 8.2 mm | 3 – 30 |
| Bottom Recess Dia | 20 mm | 5 – 60 |
| Bottom Recess Depth | 2 mm | 0.5 – 10 |
| Bottom Recess Pitch Radius | 60 mm | 10 – 120 |
| Cup Recess Dia | 80 mm | 20 – 140 |
| Cup Recess Depth | 3 mm | 0.5 – 15 |
| Exploded Layout Gap | 30 mm | 5 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu