Brackets and mounts
Divider Wall with Connector and Thumbscrew
- Bounding box
- 228.5 × 220.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Use the uploaded image as the exact reference. DO NOT redesign the product. The main component is a VERTICAL DIVIDER WALL. It stands upright at 90° from the floor. It is NOT a flat plate. It is NOT a tray. It is NOT a shelf. It is NOT a base. The divider wall creates storage compartments when multiple walls connect together. Each divider wall has: • 3 mm wall thickness • rounded top edge • reinforcing ribs on the back • slide rails on both vertical edges • locking groove for the connector • injection molded ABS construction Create one universal connector that slides onto the divider wall rails. The connector contains an internal clamp operated by a thumb screw. When tightened, the connector locks the divider wall with zero movement. Generate: • divider wall • connector • thumb screw • exploded assembly • connector section view • production-ready CAD
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Height | 200 mm | 100 – 300 |
| Wall Width | 150 mm | 80 – 250 |
| Wall Thickness | 3 mm | 1.5 – 6 |
| Top Edge Fillet | 5 mm | 2 – 15 |
| Rib Count | 3 | 1 – 6 |
| Rib Depth | 4 mm | 2 – 10 |
| Rib Width | 3 mm | 2 – 6 |
| Slide Rail Width | 6 mm | 4 – 12 |
| Slide Rail Depth | 4 mm | 2 – 8 |
| Locking Groove Width | 4 mm | 2 – 8 |
| Locking Groove Depth | 2 mm | 1 – 5 |
| Groove Height from Bottom | 100 mm | 50 – 150 |
| Connector Length (X) | 30 mm | 20 – 50 |
| Connector Width (Y) | 40 mm | 30 – 60 |
| Connector Height (Z) | 20 mm | 15 – 30 |
| Clamp Thickness | 5 mm | 3 – 10 |
| Thumb Screw Dia (M) | 6 mm | 4 – 10 |
| Screw Length | 20 mm | 10 – 40 |
| Head Diameter | 15 mm | 10 – 25 |
| Head Height | 8 mm | 5 – 15 |
| Layout Gap | 60 mm | 30 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent