Loading the interactive model…
Interactive 3D model of Divider Wall / ConnectorEverything else
Divider Wall / Connector
5 views
- Bounding box
- 60.0 × 90.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a connector that matches the existing divider wall geometry. Do not invent a new interface. Use the wall's side rails and locking features as the basis for all four slots.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Diameter | 60 mm | 20 – 120 |
| Hub Height | 30 mm | 10 – 80 |
| Wall Thickness | 3 mm | 1.5 – 10 |
| Slot Width | 8 mm | 3 – 20 |
| Slot Depth | 10 mm | 3 – 30 |
| Screw Boss OD | 14 mm | 6 – 25 |
| Screw Hole Diameter | 5 mm | 2 – 12 |
| Clamp Plate Thickness | 2 mm | 1 – 6 |
| Rib Thickness | 2 mm | 1 – 5 |
| External Fillet | 0.8 mm | 0 – 3 |
| Internal Fillet | 1 mm | 0 – 3 |
| Top Edge Radius | 4 mm | 2 – 8 |
| Rib Root Fillet | 1.5 mm | 1 – 3 |
| Draft Angle | 2 deg | 0 – 5 |
| Foot Height | 3 mm | 1 – 8 |
| Foot Diameter | 8 mm | 4 – 16 |
| Guide Rail Width | 1.5 mm | 1 – 4 |
| Guide Rail Height | 2 mm | 1 – 4 |
| Bump Radius | 1 mm | 0.5 – 3 |
| Lead-in Chamfer | 1 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS