Gears and transmission
Differential with 4 Bevel Gears
- Bounding box
- 96.0 × 96.0 × 56.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
I would need a differential with 4 bevel gears inside.
Parameters
| Name | Value | Range |
|---|---|---|
| Teeth per Bevel Gear | 12 count | 8 – 24 |
| Bevel Gear Tip Diameter | 40 mm | 20 – 80 |
| Bevel Gear Heel Diameter | 24 mm | 10 – 60 |
| Bevel Gear Face Length | 10 mm | 4 – 25 |
| Tooth Depth | 2.5 mm | 0.5 – 6 |
| Gear Offset from Centre | 16 mm | 8 – 30 |
| Centre Hub Diameter | 20 mm | 10 – 40 |
| Centre Hub Height | 12 mm | 6 – 30 |
| Cross Pin Diameter | 8 mm | 3 – 16 |
| Cross Pin Length | 30 mm | 20 – 60 |
| Centre Axle Diameter | 10 mm | 4 – 20 |
| Carrier Plate Diameter | 96 mm | 60 – 150 |
| Carrier Height | 56 mm | 40 – 100 |
| End Plate Thickness | 5 mm | 2 – 12 |
| Cage Post Diameter | 8 mm | 3 – 16 |
| Cage Post Circle Diameter | 80 mm | 50 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled