Brackets and mounts
Dielectric Immersion Cooling Enclosure with Finned Heat Sinks
- Bounding box
- 592.0 × 464.0 × 166.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wall thickness. Inside the cavity, place an array of 150 cylindrical battery cells in a 10 by 15 grid pattern. Each cell is 33mm in diameter and 140mm in height, spaced with a uniform 2mm gap between adjacent cell walls (35mm center-to-center pitch). Include a 15mm perimeter flange at the top opening with 16 M6 clearance bolt holes and a 2mm O-ring seal groove. Include a removable lid shown in the open position above the enclosure. Include two 1-inch NPT threaded port bosses on opposite ends for dielectric fluid entry and exit. Surround the outer walls of the container with external heat sinks with cooling fins, with the heat sinks mounted directly to the enclosure walls.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Length (X) | 540 mm | 100 – 1200 |
| Cavity Width (Y) | 360 mm | 80 – 800 |
| Cavity Depth (Z) | 160 mm | 40 – 400 |
| Wall Thickness | 6 mm | 2 – 20 |
| Flange Width | 15 mm | 5 – 60 |
| Flange Thickness | 12 mm | 4 – 40 |
| Bolt Hole Dia (M6 clearance) | 6.6 mm | 2 – 20 |
| Flange Bolt Count | 16 ea | 4 – 40 |
| O-Ring Groove Width | 3 mm | 1 – 12 |
| O-Ring Groove Depth | 1.4 mm | 0.5 – 6 |
| O-Ring Groove Centre Offset | 3 mm | 0 – 20 |
| Port Boss Diameter | 60 mm | 20 – 140 |
| Port Boss Length | 20 mm | 5 – 60 |
| Port Bore (1 in NPT tap) | 29 mm | 5 – 80 |
| Port Centre Height | 83 mm | 10 – 300 |
| Cell Diameter | 33 mm | 10 – 80 |
| Cell Height | 140 mm | 20 – 300 |
| Cell Pitch (c/l to c/l) | 35 mm | 5 – 120 |
| Cells along Length (X) | 15 ea | 1 – 30 |
| Cells along Width (Y) | 10 ea | 1 – 30 |
| Heat Sink Length | 500 mm | 50 – 1000 |
| Heat Sink Height | 120 mm | 20 – 400 |
| Heat Sink Base Thickness | 6 mm | 2 – 25 |
| Fin Height | 40 mm | 5 – 150 |
| Fin Thickness | 4 mm | 1 – 20 |
| Fins per Heat Sink | 20 ea | 3 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent