Brackets and mounts
DeWalt XR – väggplattor med batterifästen V3
- Bounding box
- 324 × 15.3 × 96 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
User replaces shelf with flat screw-mounted plate with battery mounts. Three independent wall plates108x96x6mm placed side by side, no shelf or diagonal braces. Female guides on front face, battery slides DOWN from above onto bottom stop. Same provisional reference profile as V2; interface/latch NOT verified for DCB181. Wall holes72x60mm rectangle on user12mm grid,4.2mm printed holes for M3.5 screws into nominal4mm wall holes using rear washers/nuts. Print with flat rear on bed, guide lips may require supports. Prototype fit test required.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall grid | 12 mm | 10 – 14 |
| Printed screw holes | 4.2 mm | 3.4 – 4.5 |
| Plate thickness | 6 mm | 5 – 10 |
| Reference wide profile | 46.4 mm | 40 – 60 |
| Reference narrow profile | 34.4 mm | 28 – 44 |
| Upper cavity height | 5.6 mm | 4 – 18 |
| Lip thickness | 3.4 mm | 2 – 5 |
| Vertical guide length | 55 mm | 45 – 65 |
| Clearance each side | 0.25 mm | 0.15 – 0.6 |
| Trial latch location | 10 mm | 5 – 25 |
| Trial latch window width | 14 mm | 8 – 22 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu