Brackets and mounts
Desktop Glareshield Risers Shelf
- Bounding box
- 500.0 × 180.0 × 458.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
I want to build a shelf that sits on my desktop and holds my WINCTRL A320 glareshield flight simulator hardware (EFIS L, EFIS R, and FCU). I'd like the glareshield to sit off my desk at approximately 18 inches height, and I'd like to have a horizontal monitor for PFD+ND and a vertical monitor for ECAMS below the shelf. the shelf needs to be minimally deep (ie. approximately 3 inches, but based on the depth of the WINCTRL glareshield with mounting legs) because the glareshield will sit in front of my monitor. thus, the support legs likely need to resemble an upside-down letter "T" and positioned in the middle of the shelf to avoid bumping into the monitor.
Parameters
| Name | Value | Range |
|---|---|---|
| Shelf Width | 500 mm | 200 – 1200 |
| Shelf Depth | 80 mm | 40 – 300 |
| Shelf Thickness | 18 mm | 6 – 50 |
| Rounded Front Edge Radius | 6 mm | 0.5 – 12 |
| Leg Post Height (desktop to shelf underside) | 440 mm | 200 – 900 |
| Post Width | 60 mm | 20 – 200 |
| Post Thickness | 20 mm | 8 – 80 |
| Foot Length (front-back) | 180 mm | 60 – 500 |
| Foot Width | 60 mm | 20 – 200 |
| Foot Thickness | 20 mm | 5 – 60 |
| Leg Inset From Shelf End | 50 mm | 5 – 200 |
| Screw Hole Diameter | 5 mm | 2 – 12 |
| Screw Hole Spacing | 36 mm | 10 – 44 |
| Pilot Hole Depth In Post | 25 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu