Deployable Drone Crash Cage

1 views

Bounding box: 270.0 × 270.0 × 85.1 mm
Engine: Precision B-rep
Parameters: 19
Published: September 29, 2026

Download

Free to download and use. See the terms.

The prompt

design a drone which has system which can deploy once it senses a crash or abnormal descent. Make sure to use no parachutes at all, only physical structure that can deploy mid air to protect major component such payload and motor and circuit and battery etc

Parameters

Name	Value	Range
Hub Diameter	64 mm	40 – 120
Hub Height	18 mm	8 – 40
Centre Bore (wiring pass-through)	12 mm	4 – 40
Mount Bolt Circle	36 mm	20 – 80
Mount Bolt Hole Dia	3.4 mm	2 – 8
Mount Bolt Count	4 pcs	3 – 8
Deployable Arms	4 pcs	3 – 8
Arm Length	85 mm	40 – 160
Arm Drop Below Hub	60 mm	20 – 140
Arm Thickness	6 mm	3 – 16
Strut Root Height	16 mm	6 – 34
Skid Foot Length	28 mm	8 – 70
Skid Foot Height	12 mm	4 – 30
Drag Vane Height	55 mm	15 – 130
Vane Tilt From Vertical	35 deg	5 – 75
Vane Base Start Fraction	0.12 ratio	0 – 0.7
Vane Base End Fraction	0.5 ratio	0.1 – 1
Hinge Pin Radius	24 mm	10 – 45
Hinge Pin Dia	4 mm	2 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS