Brackets and mounts
Dell XPS 16 Stand with Dock Tray
- Bounding box
- 380.0 × 161.5 × 130.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional, 3D-printable CAD product design for a desktop stand for a Dell XPS 16 9640 and Dell WD22TB4 Thunderbolt Dock. Devices: * Dell XPS 16 9640: 358.18 × 240.05 × 18.70 mm * Dell WD22TB4 Dock: 205 × 90 × 29 mm, cable length 0.8 m Design: Compact horizontal desktop stand, approx. 370–390 mm wide, 130–150 mm deep, 100–130 mm high. Modern minimalist industrial style, matte black/dark graphite, realistic hard-surface CAD model. Top section: * Three vertical laptop slots for upright side-standing laptops. * Each slot fits Dell XPS 16 thickness, internal width 24–26 mm. * Laptops must slide in from the side, not only from above. * Add angled side-entry guide rails, chamfered lead-ins, rounded soft-contact edges, optional TPU/rubber pads, and a stable anti-tip base. Dock section: * Directly below slots: removable pocket for Dell WD22TB4. * Internal dock clearance approx. 211 × 96 × 34 mm. * Dock slides in from front or side and remains removable. * Rear and sides partly open for ports, cables, ventilation, and service access. * Add cable channels, clips, and strain relief for power, display, Ethernet, USB, and dock cable. * Do not block any ports. Power button: * WD22TB4 has a top power button. * Keep it usable via either a top access cutout or a simple removable vertical plunger. * Prefer an external round tactile plunger button, no text label. USB-C auto-docking: * One laptop slot must include an integrated USB-C alignment system. * Route the WD22TB4 USB-C/Thunderbolt cable through a hidden channel. * Hold the USB-C connector in a fixed but slightly floating adjustable holder. * Align it to a LEFT-side Thunderbolt 4 port of the Dell XPS 16 9640, not the right port. * Laptop should slide sideways into the slot and gently meet the connector. * Add funnel-shaped lead-in, chamfered guiding ramp, TPU/flexible clamp, strain relief, replaceable insert, slotted screw holes, calibration marks, horizontal/vertical fine adjustment, and ±3 mm tolerance. * The USB-C holder must be repositionable after measuring the real port location. Manufacturing: * FDM 3D-printable. * Minimum wall thickness 3 mm. * Add ribs, fillets, chamfers, non-slip feet, optional screw holes for pads/inserts. * No sharp laptop-contact edges, fragile thin walls, blocked ports, inaccessible button, trapped dock, messy geometry, unrealistic connector alignment, or decorative fantasy shapes.
Parameters
| Name | Value | Range |
|---|---|---|
| Stand Width | 380 mm | 350 – 400 |
| Stand Depth | 145 mm | 130 – 160 |
| Stand Height | 120 mm | 110 – 140 |
| Wall Thickness | 3 mm | 2 – 5 |
| Tray Cutout Width | 220 mm | 210 – 230 |
| Tray Cutout Height | 36 mm | 34 – 40 |
| Slot Width | 25 mm | 24 – 28 |
| Slot Depth | 70 mm | 50 – 100 |
| Leftmost Slot Center X | -70 mm | -100 – -40 |
| Slot Spacing | 70 mm | 50 – 100 |
| Tray Length | 215 mm | 200 – 230 |
| Tray Width | 100 mm | 95 – 105 |
| Tray Height | 35 mm | 30 – 40 |
| Floor Thickness | 3 mm | 2 – 5 |
| Side Wall Thickness | 2 mm | 1.5 – 4 |
| Back Wall Thickness | 4 mm | 2 – 6 |
| Handle Width | 20 mm | 15 – 30 |
| Handle Height | 8 mm | 5 – 12 |
| Handle Depth | 12 mm | 8 – 18 |
| Plunger Diameter | 18 mm | 10 – 25 |
| Plunger Length | 20 mm | 15 – 30 |
| Hole Diameter | 18.2 mm | 18 – 20 |
| Hole Depth | 10 mm | 5 – 15 |
| Hole X | 0 mm | -50 – 50 |
| Hole Y | 72.5 mm | 50 – 100 |
| Holder X Length | 8 mm | 5 – 15 |
| Holder Y Width | 25 mm | 20 – 40 |
| Holder Z Height | 20 mm | 15 – 30 |
| Bore Diameter | 8.5 mm | 8 – 10 |
| Funnel Length | 5 mm | 3 – 10 |
| Holder Y from Front | 100 mm | 80 – 120 |
| Holder Z offset from slot bottom | 70 mm | 60 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu